GOLDSPAR SATIN One-Component Clear Varnish
SVB recommends the following for these items
For coated surfaces:
Degrease surface with Thinner No. 1 and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
- Bare wood: Degrease thoroughly with Thinner No. 1. Sand smooth with 80-180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. Then apply wood treatment and allow to dry.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Then thin the 1st coat of Goldspar Satin by 10-15 % before applying. Then apply a minimum of 3 unthinned coats. After every 2nd coat, sand with 320-400 grit.
Number of coats: 3-4 coats
Drying time at 15° C: 3 hours
Processing time at 15° C: min. 15 hours
Processing temperature: +5 °C to max. 35° C
Please note the following hazard warnings:
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
May cause drowsiness or dizziness.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
Get medical advice/attention if you feel unwell.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
Customers also bought
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .