SVB recommends the following for these items
DANBOLINE from International protects your bilges, lockers and bulkheads. The paint is resistant to residues of oil and fuel. Available in white and grey. Yield: 12.3 m²/litre Thinner no. 1.
For coated surfaces:
- In good condition: Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 180280 grade (grit) paper.
- In poor condition: Remove all previous coatings and prime the surface.
All surfaces: Sand primer with 180-220 grit. Remove dust and then apply 1-2 coats of Danboline.
Bare wood: Prime the surface with Yacht Primer or Interprotect.
Aluminium: Prime the surface with Yacht Primer or Interprotect.
Steel: Prime the surface with Yacht Primer or Interprotect.
GRP: Clean the surface with Super Cleaner. and rinse afterwards. Sand thoroughly with 180-220 grit sandpaper. Clean well and allow to dry. No primer required.
Drying time at 15 °C: 8 hours
Processing time at 15 °C: min. 24 hours
Verarbeitungstemperatur: +15 °C bis max. 35 °C
Please note the following hazard warnings:
Customers also bought
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .