INTERNATIONAL B-FREE EXPLORE Biocide-Free Fouling Control
Article Number
41480
EAN
05035686888944
Model no.
YBF300/750AR
Description
INTERNATIONAL - B-FREE EXPLORE
Antifouling type
Biocide-free
Colour code
YBF300
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel, Aluminium, Lead
Method of application
Roller, Brush
Yield (theoretical)
7.5
m²
Max. time before immersion
1 month
Biocide-free
Yes
For the Netherlands
Yes
Boat type
Sailboat, Motorboat
SVB recommends the following for these items
Product details
Based on cutting-edge silicone polymer technology, International's B-FREE EXPLORE totally biocide-free fouling prevention is not only incredibly effective but also has outstanding environmental benefits. The ultra-smooth, semi-glossy surface makes it extremely hard for fouling to occur. The smooth surface also gives your boat more power and greater efficiency. Any growth or dirt that settles on your hull can be easily removed with a simple wipe off or pressure wash. The paint has a low solvent content (VOC) and can be used for up to two years.
Instructions for use
Technical data:
Suitable for hulls made of aluminium, GRP, lead, cast iron, wood and steel. EXPLORE can be painted over any antifouling when used with CONVERSION COAT and TIECOAT. EXPLORE is suitable for all speeds.
Application:
To ensure optimal adhesion and protection against growth, the surface of your boat must first be cleaned, degreased and, if necessary, a touch-up layer of TIECOAT applied if it is in good condition. EXPLORE can then be applied. If the surface is in poor condition, the surface must be cleaned and sanded completely. Then apply one coat each of CONVERSION COAT Primer and TIECOAT undercoat before applying two to three coats of EXPLORE.
Instructions for use
Technical data:
- Processing temperature: +10 °C to max. 30 °C
- Drying time at 10 °C: 7 hours
- Pot life at 10°C: 4 hours
- Immersion after 25 h @ 25 °C
- 1 month before immersion
- Number of coats: 2-3
Suitable for hulls made of aluminium, GRP, lead, cast iron, wood and steel. EXPLORE can be painted over any antifouling when used with CONVERSION COAT and TIECOAT. EXPLORE is suitable for all speeds.
Application:
To ensure optimal adhesion and protection against growth, the surface of your boat must first be cleaned, degreased and, if necessary, a touch-up layer of TIECOAT applied if it is in good condition. EXPLORE can then be applied. If the surface is in poor condition, the surface must be cleaned and sanded completely. Then apply one coat each of CONVERSION COAT Primer and TIECOAT undercoat before applying two to three coats of EXPLORE.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
May cause respiratory irritation.
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
May cause respiratory irritation.
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
H226, H335, H336, H411
Documents
Brochure
PDF, 4,42 MB
Datasheet
PDF, 205,14 KB
Safety datasheet
PDF, 214,98 KB
Safety datasheet
PDF, 214,99 KB
Safety datasheet
PDF, 214,51 KB
Safety datasheet
PDF, 214,55 KB
Accessories
-41%
INTERNATIONAL
GELSHIELD 200 Two-Component Epoxy Primer
€51.29
from
€30
21
4 variants
-29%
INTERNATIONAL
SUPER CLEANER
€14.24
only
€10
04
> 100
NEW
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€50
38
2 variants
NEW
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
€45.00
from
€41
97
2 variants
-8%
Disposable Gloves / latex / 100 pcs.
€20.97
only
€19
29
36
Disposable Gloves / vinyl / 100 pcs.
only
€17
61
12
YACHTCARE
Dust Cloth
only
€3
78
> 100
3M
Premium Respirator Mask
only
€7
52
98
3M
Comfort Respirator Mask
only
€31
89
89
3M
Safety Goggles
only
€11
72
51
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Antifouling Flat Brush
from
€2
10
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
Similar items
NEW
SEAJET
Biocide-free PELLER CLEAN Antifouling Protection / 325 ml
€89.03
only
€80
63
8
HEMPEL
ECOPOWER PROP Biocide-free Spray Paint
from
€24
33
2 variants
HEMPEL
HEMPASPEED TF Biocide-free Thin-film Antifouling
from
€36
09
8 variants
HEMPEL
SilicONE Propeller Kit / black / incl. LIGHT PRIMER
only
€67
18
27
HEMPEL
ECOPOWER RACING Hard Antifouling
only
€70
55
1
HEMPEL
ECOPOWER CRUISE Self-Polishing Antifouling
only
€25
17
1
HEMPEL
SILIC ONE Biocide-Free Antifouling
from
€53
74
3 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!