HEMPEL SILIC ONE Biocide-Free Antifouling
Article Number
50412
EAN
5709516021336
Model no.
151228
Description
HEMPEL - Fouling Release SILIC ONE
Antifouling type
Biocide-free
Colour code
Not specified
Contents
750
ml
Area of application
Salt water, Fresh water
Hull material
GRP, Steel
Method of application
Roller, Brush
No. of coats (recommended)
2 - 3
Yield (theoretical)
7.58
m²
Immersion after
30
h @ 15 °C
Max. time before immersion
1 month
Biocide-free
Yes
For the Netherlands
Yes
Boat type
Sailboat, Motorboat
Existing coating
Not specified
SVB recommends the following for these items
more than 100 in stock
Product details
Discover HEMPEL's latest innovation and technological excellence
SILIC ONE, a biocide-free product based on silicone and hydrogel, gives the surface water-like properties. This means that organisms that cause fouling can no longer settle as easily on the hull and will quickly drop off as soon as the boat is in motion. It is suitable for both fast motor boats as well as sailboats.
Other impressive benefits also include the ease with which any fouling can be removed and with which the coating may be reapplied. This leads to long-term cost savings.
- Can be used on all surfaces, except wood.
- Creates a non-stick surface
- Biocide-Free
- Copper-free
What is hydrogel?
Hydrogel is based on unique, non-reactive polymers, that are added to the paint and form an invisible protective layer between the hull surface and the water. Vegetation forming organisms perceive the hull as a liquid and therefore are a lot less likely to stick to it.
Processing instructions
Technical specifications
Processing instructions
Technical specifications
- Application temperature: +10 °C (surface temperature must be above the dew point)
- Drying time at 20 °C: 3 hours (dry to touch)
- Overcoating time at 20 °C: 16 hours
Suitable for vessels made of GRP and steel.
Use
To ensure optimum adhesion of the SILIC ONE, the hull's surface has to be primed first. Use LIGHT PRIMER to do this. Then apply a layer of TIECOAT
. Using 2-K Conversion Primer makes it even easier to migrate from conventional antifouling to SILIC ONE, as Conversion Primer can be applied to previous antifoulings if they are in good condition. When applying SILIC ONE for the first time, two coats should be applied. For all following applications one layer is sufficient. After 24 hours, the boat can be launched. The maximum time span until launching should be no more than one month.
. Using 2-K Conversion Primer makes it even easier to migrate from conventional antifouling to SILIC ONE, as Conversion Primer can be applied to previous antifoulings if they are in good condition. When applying SILIC ONE for the first time, two coats should be applied. For all following applications one layer is sufficient. After 24 hours, the boat can be launched. The maximum time span until launching should be no more than one month.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Harmful to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid release to the environment.
Dispose of contents/container to …
Harmful to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid release to the environment.
Dispose of contents/container to …
H226, H412, P101, P102, P210, P273, P501
Documents
Brochure
.PDF, 261,24 KB
Datasheet
PDF, 84,18 KB
Safety datasheet
PDF, 133,64 KB
Item no.: 50413
Item no.: 50413
Brochure
.PDF, 445,88 KB
Datasheet
PDF, 91,29 KB
Safety datasheet
PDF, 142,71 KB
Item no.: 50413
Item no.: 50413
Safety datasheet
PDF, 144,04 KB
Item no.: 50432
Item no.: 50432
Safety datasheet
PDF, 142,19 KB
Test
.PDF, 2,48 MB
Brochure
.PDF, 1,45 MB
Datasheet
PDF, 85,72 KB
Datasheet
PDF, 83,45 KB
Datasheet
PDF, 82,50 KB
Accessories
-29%
INTERNATIONAL
SUPER CLEANER
€14.24
only
€10
04
> 100
YACHTCARE
Dust Cloth
only
€3
78
78
HEMPEL
Silic One Tiecoat Bonding Primer
only
€28
53
67
3M
Premium Respirator Mask
only
€7
52
> 100
3M
Safety Goggles
only
€11
72
51
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Antifouling Flat Brush
from
€2
10
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
Customers also bought
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from
€20
97
5 variants
HEMPEL
Thinner 845 (No. 5)
only
€14
24
24
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
HEMPEL
Silic One Tiecoat Bonding Primer
only
€28
53
67
HEMPEL
SilicONE Propeller Kit / black / incl. LIGHT PRIMER
only
€67
18
20
Similar items
NEW
SEAJET
Biocide-free PELLER CLEAN Antifouling Protection / 325 ml
€89.03
only
€80
63
10
NEW
INTERNATIONAL
B-FREE EXPLORE Biocide-Free Fouling Control
€75.00
from
€67
18
7 variants
HEMPEL
ECOPOWER PROP Biocide-free Spray Paint
from
€24
33
2 variants
HEMPEL
HEMPASPEED TF Biocide-free Thin-film Antifouling
from
€36
09
8 variants
HEMPEL
SilicONE Propeller Kit / black / incl. LIGHT PRIMER
only
€67
18
27
HEMPEL
ECOPOWER RACING Hard Antifouling
from
€70
55
2 variants
HEMPEL
ECOPOWER CRUISE Self-Polishing Antifouling
only
€25
17
3
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Jonathan S.
asked
on Aug 31, 2021
Hi, I recently bought enough silicone to do the drive components of my ribs outdrive and also my shafts and propellors on my own boat. I spent 12 hours preparing all surfaces, priming, tie coating and paining on the fouling. Both boats cruise at 24 to 28knots and after putting 30 hours on my 18 tonne 15m boat at about 20 knots we dived to find no silicone left on the props and rudders.
This is very disappointing as I was using this as a test to do the entire boat hull next year.
Can you think of any reason the product would be this way on my big boat but working well in the rib?
I there just too much pressure on it when applied to a larger boat?
Thanks
#50413#
Answer:
I am not shure for the aplication of silic one to the props and the rudders. I have only used it on the hull of the boat and I find it perfect. As long you do not physicali demage the antifuoling it is very good at any speeds I have traveled (up to 36 knots). A friend of mine has had it for three years now and it looks like new.
General question
Answer:
Dear Willem,
we haven´t SILIC ONE Propeller kit in our product range, but we got Hempel as a supplier, so we are able to order it for you. If you have still interest in this Product, please contact us per: info@svb24.com Your SVB-team.