HEMPEL SILIC ONE Biocide-Free Antifouling

Reset image position
Close
Back
Item no. 50413
SVB price: €53.74 (€71.65 / l )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
19 in stock
pcs.
Item no.
50412
EAN
5709516021336
Model no.
151228
Description
HEMPEL - Fouling Release SILIC ONE
Contents
750 ml
Hull material
GRP, Steel
Method of application
Roller, Brush
Biocide-free
Yes
Immersion after
30 h @ 15 °C
Max. time before immersion
1 month
Yield (theoretical)
7.58 m²
Boat type
Sailboat, Motorboat
Antifouling type
Biocide-free
Area of application
Salt water, Fresh water
No. of coats (recommended)
2 - 3
For the Netherlands
Yes
Colour code
Not specified
Existing coating
Not specified

Product details

Discover HEMPEL's latest innovation and technological excellence
SILIC ONE, a biocide-free product based on silicone and hydrogel, gives the surface water-like properties. This means that organisms that cause fouling can no longer settle as easily on the hull and will quickly drop off as soon as the boat is in motion. It is suitable for both fast motor boats as well as sailboats.
Other impressive benefits also include the ease with which any fouling can be removed and with which the coating may be reapplied. This leads to long-term cost savings.
  • Can be used on all surfaces, except wood.
  • Creates a non-stick surface
  • Biocide-Free
  • Copper-free

What is hydrogel?
Hydrogel is based on unique, non-reactive polymers, that are added to the paint and form an invisible protective layer between the hull surface and the water. Vegetation forming organisms perceive the hull as a liquid and therefore are a lot less likely to stick to it.

Processing instructions

Technical specifications
  • Application temperature: +10 °C (surface temperature must be above the dew point)
  • Drying time at 20 °C: 3 hours (dry to touch)
  • Overcoating time at 20 °C: 16 hours

Suitable for vessels made of GRP and steel.
Use
To ensure optimum adhesion of the SILIC ONE, the hull's surface has to be primed first. Use LIGHT PRIMER to do this. Then apply a layer of TIECOAT
. Using 2-K Conversion Primer makes it even easier to migrate from conventional antifouling to SILIC ONE, as Conversion Primer can be applied to previous antifoulings if they are in good condition. When applying SILIC ONE for the first time, two coats should be applied. For all following applications one layer is sufficient. After 24 hours, the boat can be launched. The maximum time span until launching should be no more than one month.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Harmful to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid release to the environment.
Dispose of contents/container to …
H226, H412, P101, P102, P210, P273, P501

Documents

en-flag Brochure
.PDF, 261,24 KB
en-flag Datasheet
PDF, 84,18 KB
en-flag Safety datasheet
PDF, 133,64 KB
Item no.: 50413
de-flag Brochure
.PDF, 445,88 KB
de-flag Datasheet
PDF, 91,29 KB
de-flag Safety datasheet
PDF, 142,71 KB
Item no.: 50413
de-flag Safety datasheet
PDF, 144,04 KB
Item no.: 50432
de-flag Safety datasheet
PDF, 142,19 KB
de-flag Test
.PDF, 2,48 MB
fr-flag Brochure
.PDF, 1,45 MB
fr-flag Datasheet
PDF, 85,72 KB
es-flag Datasheet
PDF, 83,45 KB
it-flag Datasheet
PDF, 82,50 KB

What other SVB customers have to say

100% real reviews

19 customer reviews

4.6 (out of 19 ratings)
3 Stars
(0)
2 Stars
(0)
1 Stars
(1)
100% recommend SVB
  • Advantages
  • Price/performance ratio (2)
  • Colour (2)
  • Yield (theoretical) (2)
  • Processing (2)
  • Effect (2)
  • Disadvantages
  • Price/performance ratio (1)
Willem R.
by Willem R. Flag of Belgium 3/2/2022 Verified purchase Variant: 50412
waardeloos
Absoluut niet tevreden over het resultaat. Heb aangroei die weliswaar vermindert na enkele uren zeilen....Na het tweede seizoen ga ik het verwijderen ook al omdat je iedere keer een nieuwe laag moeten zetten wanneer je op de kant gaat voor meer dan 2 maanden. Verwijderen is niet eenvoudig en het afval is schadelijk voor het milieu (PFOS)!!!

Customer images (5) from all reviews

View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Italiano
  • Flag of Français

Technical question

Question:
User image of Jonathan S.
Jonathan S. asked
on Aug 31, 2021
Flag of English Hi, I recently bought enough silicone to do the drive components of my ribs outdrive and also my shafts and propellors on my own boat. I spent 12 hours preparing all surfaces, priming, tie coating and paining on the fouling. Both boats cruise at 24 to 28knots and after putting 30 hours on my 18 tonne 15m boat at about 20 knots we dived to find no silicone left on the props and rudders. This is very disappointing as I was using this as a test to do the entire boat hull next year. Can you think of any reason the product would be this way on my big boat but working well in the rib? I there just too much pressure on it when applied to a larger boat? Thanks #50413#
Answer:
User image of Tomaz J.
Tomaz J. answered
on Aug 31, 2021
I am not shure for the aplication of silic one to the props and the rudders. I have only used it on the hull of the boat and I find it perfect. As long you do not physicali demage the antifuoling it is very good at any speeds I have traveled (up to 36 knots). A friend of mine has had it for three years now and it looks like new.

General question

Question:
User image of Willem R.
Willem R. asked
on Mar 29, 2018
Flag of English Do you haven the SILIC ONE propeller kit ?
Answer:
User image of Sven W.
Sven W. answered
on Dec 21, 2018
Dear Willem, we haven´t SILIC ONE Propeller kit in our product range, but we got Hempel as a supplier, so we are able to order it for you. If you have still interest in this Product, please contact us per: info@svb24.com Your SVB-team.