HEMPEL CLASSIC Self-Polishing Antifouling
Article Number
50442
EAN
5709516022180
Model no.
71220
Description
HEMPEL - CLASSIC
Antifouling type
Self-polishing antifouling
Colour code
Black 19990
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush, Spray gun
Biocide-free
No
Immersion after
30
h @ 15 °C
Max. time before immersion
1 month
Yield (theoretical)
9.38
m²
BAuA-No.
N-68012
Boat type
Sailboat, Motorboat
Area of application
Salt water, Fresh water
No. of coats (recommended)
2 - 3
Existing coating
SEATEC Standard Pro, INTERNATIONAL Cruiser 200, INTERNATIONAL Cruiser 250, INTERNATIONAL Micron 300, INTERNATIONAL Micron 350, HEMPEL Classic, HEMPEL Mille NCT, HEMPEL Ecopower Cruise, AWN Selbstpolierendes Antifouling, EPIFANES Copper-Cruise
For the Netherlands
Yes
SVB recommends the following for these items
Product details
The high-performance, self-polishing CLASSIC antifouling from Hempel protects your underwater hull throughout the season. Suitable for boats made of glass fibre, wood, plywood and steel. Not to be used on light metal alloys such as aluminium. Danger of corrosion in case of direct contact. Hempel CLASSIC is approved in the Netherlands. owever, the approval number is not printed on the label as required in the Netherlands. Available in different versions.
Processing instructions
Technical data
Application
For uncoated surfaces: Remove salts, detergents, dirt and marine growth using a high-pressure cleaner. Prime the prepared surface with LIGHT PRIMER and then, while the primer is still tacky, coat with UNDERWATER PRIMER to act as an adhesion facilitator.
For coated surfaces: Remove fouling and impurities using a high-pressure cleaner. In case of unknown antifouling, wet sand the substrate and remove dust. If the previous antifouling layer is in poor condition, seal the area to be treated with UNDERWATER PRIMER. If the condition of the previous coating is bad all round, it is recommended to remove it and then start a new layering process (see above).
Use on GRP, wood and steel/lead: Every 12 months, apply two coats to the surface to be treated. At the waterline and on heavily used areas of the underwater hull, apply a further coat. For Sweden, Finland, Netherlands apply only one coat of antifouling.
Do not apply to aluminium or other light alloys.
Note
Handle with care. Before and during application, all safety instructions on the packaging and containers, the safety data sheets prepared by HEMPEL and local or national safety regulations must be followed.
Processing instructions
Technical data
- Theoretical yield: 12 m²/l.
- Processing temperature: +10° C to +30° C
- Drying time at 20 °C: 4 hours
- Overcoating time at 20 °C: min. 5 hours
Application
For uncoated surfaces: Remove salts, detergents, dirt and marine growth using a high-pressure cleaner. Prime the prepared surface with LIGHT PRIMER and then, while the primer is still tacky, coat with UNDERWATER PRIMER to act as an adhesion facilitator.
For coated surfaces: Remove fouling and impurities using a high-pressure cleaner. In case of unknown antifouling, wet sand the substrate and remove dust. If the previous antifouling layer is in poor condition, seal the area to be treated with UNDERWATER PRIMER. If the condition of the previous coating is bad all round, it is recommended to remove it and then start a new layering process (see above).
Use on GRP, wood and steel/lead: Every 12 months, apply two coats to the surface to be treated. At the waterline and on heavily used areas of the underwater hull, apply a further coat. For Sweden, Finland, Netherlands apply only one coat of antifouling.
Do not apply to aluminium or other light alloys.
Note
Handle with care. Before and during application, all safety instructions on the packaging and containers, the safety data sheets prepared by HEMPEL and local or national safety regulations must be followed.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
May cause respiratory irritation.
May cause drowsiness or dizziness.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Dispose of contents/container to …
Store locked up.
Store in a well-ventilated place.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Collect spillage.
Call a POISON CENTER or doctor/physician if you feel unwell.
Immediately call a POISON CENTER or doctor/physician.
IF INHALED:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep container tightly closed.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
May cause drowsiness or dizziness.
Very toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Causes serious eye damage.
Dispose of contents/container to …
Store locked up.
Store in a well-ventilated place.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Collect spillage.
Call a POISON CENTER or doctor/physician if you feel unwell.
Immediately call a POISON CENTER or doctor/physician.
IF INHALED:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep container tightly closed.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H335, H336, H410, H226, H318, P501, P405, P403, P305+P351+P338, P391, P312, P310, P304, P280, P273, P271, P261, P233, P210, P102, P101
Documents
Datasheet
PDF, 87,66 KB
Datasheet
PDF, 93,27 KB
Manual
PDF, 269,69 KB
Safety datasheet
PDF, 163,94 KB
Item no.: 50442
Item no.: 50442
Safety datasheet
PDF, 155,03 KB
Item no.: 50444
Item no.: 50444
Safety datasheet
PDF, 159,26 KB
Item no.: 50446
Item no.: 50446
Datasheet
PDF, 86,72 KB
Datasheet
PDF, 89,53 KB
Datasheet
PDF, 86,59 KB
Datasheet
PDF, 91,39 KB
Datasheet
PDF, 91,99 KB
Datasheet
PDF, 88,27 KB
Datasheet
PDF, 89,79 KB
Accessories
-29%
INTERNATIONAL
SUPER CLEANER
€14.24
only
€10
04
> 100
HEMPEL
One-Component UNDERWATER PRIMER
from
€20
13
2 variants
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from
€20
97
5 variants
HEMPEL
Thinner 808 (No. 3)
only
€14
24
60
YACHTCARE
Dust Cloth
only
€3
78
82
3M
Premium Respirator Mask
only
€7
52
> 100
3M
Safety Goggles
only
€11
72
54
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Antifouling Flat Brush
from
€2
10
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
PU Foam Radiator Roller
only
€0
67
> 100
Customers also bought
Similar items
NEW
SEAJET
EMPEROR A 034 Self-polishing Antifouling
€54.58
from
€46
18
10 variants
NEW
SEAJET
SHOGUN 033 Self-Polishing Antifouling
€53.74
from
€44
50
10 variants
NEW
SEAJET
SAMURAI 031 Self-polishing Antifouling
€36.09
from
€32
73
8 variants
-7%
EPIFANES
COPPER CRUISE Self Polishing Antifouling
€51.70
from
€47
86
10 variants
-50%
INTERNATIONAL
MICRON 300 Self-Polishing Antifouling
€279.23
only
€138
61
14
HEMPEL
ECOPOWER CRUISE Self-Polishing Antifouling
only
€25
17
3
-26%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€28.53
from
€20
97
8 variants
-44%
INTERNATIONAL
CRUISER 250 Self-Polishing Antifouling
€67.68
from
€37
77
10 variants
-42%
INTERNATIONAL
CRUISER 200 Self-Polishing Antifouling
€67.78
from
€39
45
10 variants
-46%
INTERNATIONAL
MICRON 350 Self-Polishing Antifouling
€93.91
from
€50
38
11 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!