SVB recommends the following for this item
For coated surfaces:
Sand the surface, clean and allow to dry.
For uncoated surfaces:
- Wood: Sand and remove dust. Then apply wood treatment and allow to dry.
- Plywood: Sand and remove dust. Then seal.
All substrates: Thoroughly clean and degrease. Sand and rinse the substrate. Then apply the first coat of Dura-Satin Varnish max. 20 % diluted, the second coat max. 10 % diluted. Then apply 3 more coats undiluted.
Drying time at 20° C: 3 hours
Processing time at 20° C: min. 24 hours
Processing temperature: +5° C to max. 35° C
Please note the following hazard warnings:
Customers also bought
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .