Item no.
50710
EAN
5709516020377
Model no.
56251100000,75
Description
HEMPEL - Non-slip deck coating
Colour code
white 10000
Contents
750
ml
Yield (theoretical)
6.9
m²
Finish
Semi-gloss
No. of components
1 component
Method of application
Roller, Brush
No. of coats (recommended)
2 - 3
for substrate
GRP, Wood, Steel
SVB recommends the following for these items
Product details
Semi-glossy, quick-drying top coat from Hempel with fine granules for a non-slip finish. Suitable for fiberglass, wood and steel. Hard-wearing, with good resistance to sunlight, water and oil. For indoor and outdoor use above the waterline. Application with: Brush, roller, paint pad or spray. Dilution: Thinner 808 (No. 3). Theoretical yield: 9.2 m²/l. Content: 750 ml. Available in different colours.
Processing instructions
For coated surfaces: Sand the surface, clean and allow to dry. Then apply a primer.
For uncoated surfaces:
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 3 hours
Processing temperature: +15 °C to max. 35 °C
Processing instructions
For coated surfaces: Sand the surface, clean and allow to dry. Then apply a primer.
For uncoated surfaces:
- GRP: Sand down and remove dust.
- Wood: Sand and remove dust. Then apply wood treatment and allow to dry.
- Steel: Rinse with water and remove rust.
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 3 hours
Processing temperature: +15 °C to max. 35 °C
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Causes skin irritation.
Harmful if inhaled.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Wash … thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF INHALED:
Call a POISON CENTER or doctor/physician if you feel unwell.
Take off contaminated clothing and wash before reuse.
Dispose of contents/container to …
Keep cool.
IF ON SKIN: Wash with plenty of soap and water.
In case of fire: Use … for extinction.
Causes skin irritation.
Harmful if inhaled.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Wash … thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF INHALED:
Call a POISON CENTER or doctor/physician if you feel unwell.
Take off contaminated clothing and wash before reuse.
Dispose of contents/container to …
Keep cool.
IF ON SKIN: Wash with plenty of soap and water.
In case of fire: Use … for extinction.
H226, H315, H332, P101, P102, P210, P261, P264, P271, P280, P304, P312, P362, P501, P235, P302+P352, P370+P378
Documents
Datasheet
PDF, 266,90 KB
Safety datasheet
PDF, 156,74 KB
Item no.: 50710
Item no.: 50710
Safety datasheet
PDF, 157,46 KB
Item no.: 50713
Item no.: 50713
Safety datasheet
PDF, 158,10 KB
Item no.: 50711
Item no.: 50711
Safety datasheet
PDF, 157,42 KB
Item no.: 50712
Item no.: 50712
Safety datasheet
PDF, 177,48 KB
Accessories
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from €24
33
HEMPEL
Thinner 808 (No. 3)
only €15
92
YACHTCARE
Dust Cloth
only €3
32
3M
Painter's Tape 25 mm x 50 m
only €8
36
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from €2
18
Varnishing Flat Brushes
from €3
28
PU Foam Radiator Roller
only €0
67
Customers also bought
Similar items
BOERO
GRIP ANTISKID Anti-Slip Additive
only €9
20
€10.36
-11%
EPIFANES
Non-Skid Deck Coating / Anti-Slip Paint
from €31
05
Roller for Deck Coating
only €7
52
KIWI GRIP
Non-Skid Deck Coating
from €58
78
INTERNATIONAL
NON-SLIP Aditive for Boat Paint
only €7
98
€10.72
-26%
INTERNATIONAL
INTERDECK Non-Slip Topcoat
from €25
17
€43.26
-42%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
No questions asked yet. Be the first to ask a question!