HEMPEL
MULTICOAT One-Component Satin Matt Boat Varnish
Item no.
51703
EAN
5709516000539
Model no.
51120100000,75
Description
HEMPEL - MULTICOAT
Colour code
white 10000
Contents
750
ml
Yield (theoretical)
8.63
m²
Finish
Silk mat
No. of components
1 component
Method of application
Roller, Brush
No. of coats (recommended)
2 - 3
for substrate
GRP, Wood, Steel
SVB recommends the following for these items
Product details
1 component paint with a satin finish. Suitable for all surfaces above the waterline. MULTICOAT provides special protection for the bilge and storage areas or for the deck. It has a g ood resistance to water and oil.Thinner 823 or 811. Yield approx. 11.5 m²/litre.
Processing instructions:
For coated surfaces: Sand the surface, clean and allow to dry. Then apply a primer.
For uncoated surfaces:
Processing instructions:
For coated surfaces: Sand the surface, clean and allow to dry. Then apply a primer.
For uncoated surfaces:
- GRP: Sand down and remove dust.
- Wood: Sand and remove dust. Then apply wood treatment and allow to dry.
- Steel: Rinse with water and remove rust.
Drying time at 20 °C: 3 hours
Processing time at 20 °C: min. 24 hours
Processing temperature: +5 °C to max. 35 °C
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
May cause drowsiness or dizziness.
Flammable liquid and vapour.
May cause an allergic skin reaction.
If skin irritation occurs: Get medical advice/attention.
IF ON SKIN: Wash with plenty of soap and water.
Take off contaminated clothing and wash before reuse.
Wear protective gloves/protective clothing/eye protection/face protection.
Dispose of contents/container to …
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Call a POISON CENTER or doctor/physician if you feel unwell.
IF INHALED:
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Flammable liquid and vapour.
May cause an allergic skin reaction.
If skin irritation occurs: Get medical advice/attention.
IF ON SKIN: Wash with plenty of soap and water.
Take off contaminated clothing and wash before reuse.
Wear protective gloves/protective clothing/eye protection/face protection.
Dispose of contents/container to …
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Call a POISON CENTER or doctor/physician if you feel unwell.
IF INHALED:
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H336, H226, H317, P332+P313, P302+P352, P362, P280, P501, P403+P233, P405, P312, P304, P271, P261, P210, P102, P101
Documents
Datasheet
PDF, 87,52 KB
Manual
.PDF, 2,65 MB
Datasheet
PDF, 267,04 KB
Safety datasheet
PDF, 147,17 KB
Item no.: 50213
Item no.: 50213
Safety datasheet
PDF, 147,18 KB
Item no.: 51705
Item no.: 51705
Safety datasheet
PDF, 147,21 KB
Item no.: 51707
Item no.: 51707
Safety datasheet
PDF, 145,40 KB
Item no.: 50464
Item no.: 50464
Safety datasheet
PDF, 143,22 KB
Item no.: 51704
Item no.: 51704
Safety datasheet
PDF, 146,59 KB
Item no.: 51706
Item no.: 51706
Safety datasheet
PDF, 146,36 KB
Item no.: 51703
Item no.: 51703
Datasheet
PDF, 47,36 KB
Manual
PDF, 265,56 KB
Accessories
HEMPEL
One-Component PRIMER UNDERCOAT
from €22
65
YACHTCARE
Dust Cloth
only €3
32
HEMPEL
Thinner 811 (No. 1)
only €16
76
Varnishing Flat Brushes 25 mm / 50 mm
from €24
33
Varnishing Flat Brushes
from €3
28
Varnishing Flat Brushes 20 mm
only €1
68
YACHTICON
Professional Foam Paint Roller
only €5
46
€5.84
-7%
Mini Polishing and Grinding Machine, battery-powered
only €100
80
Customers also bought
Stainless Steel Hose Clamps
from €1
76
YACHTICON
AQUA CLEAN without Chlorine
from €7
52
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from €24
33
HEMPEL
One-Component PRIMER UNDERCOAT
from €22
65
TIKAL
TIKALFLEX Contact 12 Adhesive / Sealant
from €4
16
HEMPEL
Thinner 811 (No. 1)
only €16
76
PANTERA
MS-3000/60 V2 Construction Adhesive
from €13
40
SVB Bag with Coordinate-Imprint
only €1
26
SEATEC
Epoxy Putty
from €20
97
€26.85
-22%
Similar items
INTERNATIONAL
TOPLAC PLUS High Gloss One-Component Boat Paint
from €16
76
€25.82
-35%
EPIFANES
One-Component High-Gloss Waterline Boat Paint
from €15
08
€16.30
-7%
HEMPEL
BRILLIANT GLOSS One-Component Top Coat
from €18
45
EPIFANES
BLACK BOTTOM Semi-Gloss Boat Coating
from €27
69
INTERNATIONAL
SUPER GLOSS HS High Gloss One-Component Boat Varnish
from €25
17
€42.97
-41%
EPIFANES
MONO-URETHANE One-Component High Gloss Boat Paint
from €31
89
€34.70
-8%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
No questions asked yet. Be the first to ask a question!