HEMPEL

MILLE NCT Self-Polishing Antifouling

SVB price: €42.82 (€57.09 / l )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
25 in stock
Item no.
50475
EAN
5709516027413
Model no.
7174A101010,75
Description
HEMPEL - MILLE NCT
Antifouling type
Self-polishing antifouling
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush
Biocide-free
No
Immersion after
30 h @ 15 °C
Max. time before immersion
9 months
No. of coats (recommended)
2 - 3

Product details

MILLE NCT combines HEMPEL's patented nanocapsule technology with a self-polishing effect to achieve the perfect balance between polishing rate and release of antifouling agents. The effect is controlled and continuous. Mille NCT antifouling is extremely powerful and protective. It is perfectly suited for sailboats and cruisers made of fibreglass, wood and steel and can be used in all waters. Compatible with virtually all known antifoul systems. Pack sizes: 750 ml and 2.5 litres. Yield: approx. 13.3 m²/litre. Thinner 808.

Processing instructions

Technical data
  • Processing temperature: +10° C to +30° C
  • Drying time at 20 °C: 4 hours
  • Overcoating time at 20 °C: min. 5 hours

Application

For uncoated surfaces: Remove salts, detergents, dirt and marine growth using a high-pressure cleaner. Prime the prepared surface with LIGHT PRIMER and then, while the primer is still tacky, coat with UNDERWATER PRIMER to act as an adhesion facilitator.

For coated surfaces: Remove fouling and impurities using a high-pressure cleaner. In case of unknown antifouling, wet sand the substrate and remove dust. If the previous antifouling layer is in poor condition, seal the area to be treated with UNDERWATER PRIMER. If the condition of the previous coating is bad all round, it is recommended to remove it and then start a new layering process (see above).

Application: Every 12 months, apply two coats to the surface to be treated. At the waterline and on heavily used areas of the underwater hull, apply a further coat.

Note
Handle with care. Before and during application, all safety instructions on the packaging and containers, the safety data sheets prepared by HEMPEL and local or national safety regulations must be followed.

These antifoulings / paints may not be used in Holland.

Use biocidal products with care. Always read the label and product information prior to use.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
May cause drowsiness or dizziness.
Suspected of causing cancer.
May cause damage to organs through prolonged or repeated exposure.
Very toxic to aquatic life with long lasting effects.
Causes serious eye damage.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Obtain special instructions before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not spray on an open flame or other ignition source.
Keep container tightly closed.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF INHALED:
Immediately call a POISON CENTER or doctor/physician.
Call a POISON CENTER or doctor/physician if you feel unwell.
Collect spillage.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Store in a well-ventilated place.
Store locked up.
Dispose of contents/container to …
H226, H336, H351, H373, H410, H318, P101, P102, P201, P210, P211, P233, P261, P271, P273, P280, P304, P310, P312, P391, P305+P351+P338, P308+P313, P403, P405, P501

Documents

en-flag Datasheet
PDF, 174,41 KB
Item no.: 50406,50407
en-flag Datasheet
PDF, 87,21 KB
en-flag Datasheet
PDF, 88,29 KB
de-flag Datasheet
PDF, 93,67 KB
de-flag Datasheet
PDF, 97,36 KB
de-flag Safety datasheet
PDF, 205,13 KB
Item no.: 50365,50366
de-flag Safety datasheet
PDF, 201,74 KB
Item no.: 50437,50438
de-flag Safety datasheet
PDF, 203,28 KB
Item no.: 50361,50362
de-flag Safety datasheet
PDF, 202,81 KB
Item no.: 50408,50409
de-flag Safety datasheet
PDF, 204,41 KB
Item no.: 50406,50407
de-flag Safety datasheet
PDF, 176,84 KB
Item no.: 50475,50476
it-flag Datasheet
.PDF, 89,52 KB

What other SVB customers have to say

100% real reviews

64 customer reviews

4.4 (out of 64 ratings)
100% recommend SVB
  • Advantages
  • Colour (1)
  • Yield (theoretical) (1)
  • Price/performance ratio (1)
  • Processing (1)
  • Effect (1)
Karl K.
Flag of Finland Verified purchase 50408
Quality Ok.
Karl K.
Flag of Finland Verified purchase 50361
Excellent paint for 9 months\r\n
Catrin & Uwe S.
Flag of Denmark Verified purchase 50358
product and result is ok
View all ratings

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Français
  • Flag of Deutsch
  • Flag of Español
No questions asked yet. Be the first to ask a question!