HEMPEL LIGHT PRIMER High Performance Two-Component Epoxy Primer

Reset image position
Item no. 50011
SVB price: €20.97 (€56.67 / l )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
more than 100 in stock
Available variants:
Image of LIGHT PRIMER SPRAY 2-Part Epoxy Primer


2-component epoxy primer spray for areas below and above water. Suitable for use on GRP, metal, plywood and hardwood. Colour: cream.

Item no.
Model no.
No. of components
2 components
Area of application
Above water, Below water
For substrate
GRP, Wood, Steel, Aluminium
Method of application
Roller, Brush, Spray gun
Osmosis prevention
Overcoating intervals
See data sheet
Colour code
11630 lightgrey
Yield (theoretical)
3 m²

Product details

The high-quality, two-component epoxy primer is suitable for below and above the waterline. On rigid substates, it forms a good barrier against ingress of water vapour, on GRP for osmosis prevention and repair, on metals for corrosion protection. It can be processes also on plywood and hardwood. LIGHT PRIMER is a very good primer for topcoats and antifouling. 8.2 m²/l, thinner: 845.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Hazard warnings
Causes skin irritation.
May cause an allergic skin reaction.
Harmful if inhaled.
Toxic to aquatic life with long lasting effects.
Harmful to aquatic life with long lasting effects.
Flammable liquid and vapour.
Harmful if swallowed.
Causes serious eye damage.
Dispose of contents/container to …
Do no eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Call a POISON CENTER or doctor/physician if you feel unwell.
Rinse mouth.
Do NOT induce vomiting.
Collect spillage.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Store in a well-ventilated place. Keep container tightly closed.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If skin irritation occurs: Get medical advice/attention.
IF ON SKIN: Wash with plenty of soap and water.
Take off contaminated clothing and wash before reuse.
Wash … thoroughly after handling.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H315, H317, H332, H411, H412, H226, H302, H318, P501, P270, P271, P304, P312, P330, P331, P391, P301+P310, P303+P361+P353, P403+P233, P310, P305+P351+P338, P332+P313, P302+P352, P362, P264, P261, P273, P280, P210, P102, P101


en-flag Datasheet
.PDF, 33,35 KB
en-flag Datasheet
PDF, 89,18 KB
en-flag Manual
.PDF, 2,65 MB
de-flag Datasheet
PDF, 95,99 KB
de-flag Manual
PDF, 589,94 KB
Item no.: 50011,50012,50156
de-flag Manual
PDF, 223,12 KB
de-flag Safety datasheet
PDF, 198,20 KB
de-flag Safety datasheet
PDF, 202,45 KB
de-flag Safety datasheet
PDF, 255,93 KB
de-flag Safety datasheet
PDF, 252,54 KB
de-flag Safety datasheet
PDF, 151,92 KB
es-flag Datasheet
.PDF, 89,57 KB
fr-flag Datasheet
.PDF, 89,75 KB
it-flag Datasheet
.PDF, 771,47 KB
it-flag Datasheet
.PDF, 88,08 KB

What other SVB customers have to say

100% real reviews

57 customer reviews

Thomas G.
by Thomas G. Flag of Germany 12/31/2023 Verified purchase Variant: 50011
not just for boats - all GRP products
I used this primer to renovate the plastic roof of my VW bus, which was badly damaged by hail. Vehicle paint, clear coat and base coat, sanded and gel code sanded. Be sure to use a machine with very good suction and wear at least an FFP2 protective mask. I applied this primer in 3 coats with the roller. Then 2 coats with a 2K boat varnish.
Thomas G.
by Thomas G. Flag of Germany 11/22/2023 Verified purchase Variant: 50699
Good osmosis primer also for WoMO high roofs made of GRP
I used the Hempel Light Primer on the GRP high roof of my motorhome.
After massive hail damage, the roof needed to be renovated. Most car shops have little to no experience with fiberglass parts. That's how it was for me too. I completely sanded the car paint off the roof. Please use high-quality respiratory protection. The roof was then coated with three coats of Hempel Light Primer as osmosis protection. The application was carried out with the roller. Correctly adjusted, base hardener thinner (see above) I achieved an excellent leveling of the layer. When adding dilution, a little is better than a lot, helps a lot.
Franz F.
by Franz F. Flag of Germany 10/26/2023 Verified purchase Variant: 50156
High quality product
I have been using it on my aluminum boat for years - it has constantly improved
View all ratings

Rate product

How would you rate this product?
Completely fails to meet my expectations
Only some expectations are met
Meets my basic expectations
Slightly better than my general expectations
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Français
  • Flag of Deutsch
No questions asked yet. Be the first to ask a question!