HEMPEL ECOPOWER RACING Hard Antifouling

Only 2 left in stock
pcs.
SVB price: €70.55 (€28.22 / l )
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€70.55 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Item no.
50463
EAN
5709516024955
Model no.
76460
Description
HEMPEL - ECOPOWER RACING
Antifouling type
Hard antifouling
Colour
Red
Colour code
Red 56460
Contents
2.5 l
Area of application
Fresh water
Hull material
GRP, Wood, Steel, Aluminium
Method of application
Roller, Brush, Spray gun
Biocide-free
Yes
Immersion after
30 h @ 15 °C
Max. time before immersion
9 months
Yield (theoretical)
30.75 m²
Boat type
Sailboat, Motorboat
No. of coats (recommended)
2 - 3
Existing coating
SEATEC Sprint Pro, INTERNATIONAL Ultra 300, HEMPEL Hard Racing TecCel, HEMPEL Ecopower Racing, BOERO Altura 619 Plus, BOERO Scirocco 622, AWN Hart Antifouling
For the Netherlands
Yes

Product details

Ecopower Racing is a biocide-free hard antifouling with TecCel. Antifouling reduces friction, increasing sail speed and reducing fuel consumption. It also protects your epoxy coating from fouling and can be easily cleaned without chalking.

Please note that the ECOPOWER RACING is only suitable for freshwater!

Ecopower Racing is suitable for glass fibre, aluminium, wood, plywood and steel hulls and is recommended in waters with demanding environmental requirements. Thinner 808. Available in different versions.

Processing instructions

Technical Data
  • Theoretical yield:12.3 m²
  • Drying time at 20 °C: 4 hours
  • Overcoating time at 20 °C: min. 5 hours

Application

For uncoated surfaces: Remove salts, detergents, dirt and marine growth using a high-pressure cleaner. Prime the prepared surface with LIGHT PRIMER and then, while the primer is still tacky, coat with UNDERWATER PRIMER to act as an adhesion facilitator.

For coated surfaces: Remove fouling and impurities using a high-pressure cleaner. In case of unknown antifouling, wet sand the substrate and remove dust. If the previous antifouling layer is in poor condition, seal the area to be treated with UNDERWATER PRIMER. If the condition of the previous coating is bad all round, it is recommended to remove it and then start a new layering process (see above).

Every 12 months, apply two coats of Hempel Hard Racing to the surface to be treated. At the waterline and on heavily used areas of the underwater hull, apply a further coat.

Note
Handle with care. Before and during application, all safety instructions on the packaging and containers, the safety data sheets prepared by HEMPEL and local or national safety regulations must be followed.
Do not apply to aluminium or other light alloys.

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
May cause respiratory irritation.
May cause drowsiness or dizziness.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Flammable liquid and vapour.
Dispose of contents/container to …
Store locked up.
Store in a well-ventilated place.
IF exposed or concerned: Get medical advice/attention.
Collect spillage.
Call a POISON CENTER or doctor/physician if you feel unwell.
IF INHALED:
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Keep container tightly closed.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Obtain special instructions before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H335, H336, H351, H411, H226, P501, P405, P403, P308+P313, P391, P312, P304, P280, P273, P271, P261, P233, P210, P201, P102, P101

Documents

en-flag Datasheet
PDF, 88,67 KB
de-flag Datasheet
PDF, 94,63 KB
de-flag Manual
PDF, 267,77 KB
de-flag Safety datasheet
PDF, 182,15 KB
Item no.: 50458,50459
de-flag Safety datasheet
PDF, 183,58 KB
Item no.: 50460,50461
de-flag Safety datasheet
PDF, 163,68 KB
Item no.: 50462,50463
de-flag Safety datasheet
PDF, 161,78 KB
Item no.: 50456,50457

What other SVB customers have to say

100% real reviews
Nobody has rated this product yet

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
No questions asked yet. Be the first to ask a question!