HEMPEL ECOPOWER PROP Biocide-free Spray Paint
Article Number
52371
EAN
5709516024061
Model no.
7446X1043000,5R
Description
HEMPEL - ECOPOWER PROP
Antifouling type
Propeller & Z-drive antifouling
Colour code
10430 Penta Grey
Contents
500
ml
Area of application
Salt water, Fresh water
Method of application
Spray can
Yield (theoretical)
5.5
m²
Immersion after
30
h @ 15 °C
Max. time before immersion
1 month
Biocide-free
Yes
For the Netherlands
Yes
Boat type
Sailboat, Motorboat
SVB recommends the following for these items
Product details
ECOPOWER PROP is a biocide-free spray, used as a coating for propellers, stern and z-drives. It makes it difficult for fouling to fully attach, making cleaning easier. Advanced binder technology controls the self-renewing effect throughout the season. All surfaces can be coated quickly, easily and precisely with the spray. The coated areas can then be easily cleaned. Contents: 500 ml.
How to use
Ensure that all surfaces are clean and free of grease, as well as dry and dust-free. Do not apply the antifouling spray in direct sunlight and only in dry weather.
Coated surfaces
Remove loose material with a high-pressure cleaner. Wet abrade existing, older and hard layers and remove dust. Clean and dry the surface. If condition of previous antifouling is poor, seal with 1 coat of primer (e.g. Underwater Primer) If previous antifouling is in general bad condition, it is recommended to remove previous coats and prime before applying antifouling.
Uncoated surfaces: (New build)
Prime prepared surface with Light Primer Spray and apply a tiecoat (e.g. Underwater Primer) whilst the surface is still tacky.
- Touch dry: 15 min @ 20°C
- Time to immersion: min. 24 hours, max. 1 month
- Gloss: Semi-flat
How to use
Ensure that all surfaces are clean and free of grease, as well as dry and dust-free. Do not apply the antifouling spray in direct sunlight and only in dry weather.
Coated surfaces
Remove loose material with a high-pressure cleaner. Wet abrade existing, older and hard layers and remove dust. Clean and dry the surface. If condition of previous antifouling is poor, seal with 1 coat of primer (e.g. Underwater Primer) If previous antifouling is in general bad condition, it is recommended to remove previous coats and prime before applying antifouling.
Uncoated surfaces: (New build)
Prime prepared surface with Light Primer Spray and apply a tiecoat (e.g. Underwater Primer) whilst the surface is still tacky.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
May cause respiratory irritation.
May cause drowsiness or dizziness.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Extremely flammable aerosol.
Pressurized container: may burst if heated.
Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
IF exposed or concerned: Get medical advice/attention.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Collect spillage.
Call a POISON CENTER or doctor/physician if you feel unwell.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Pressurized container: Do not pierce or burn, even after use.
Do not spray on an open flame or other ignition source.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Obtain special instructions before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
May cause drowsiness or dizziness.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Extremely flammable aerosol.
Pressurized container: may burst if heated.
Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
IF exposed or concerned: Get medical advice/attention.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Collect spillage.
Call a POISON CENTER or doctor/physician if you feel unwell.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release to the environment.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Pressurized container: Do not pierce or burn, even after use.
Do not spray on an open flame or other ignition source.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Obtain special instructions before use.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
H335, H336, H351, H411, H222, H229, P410+P412, P403+P233, P405, P308+P313, P304+P340, P391, P312, P280, P273, P271, P261, P251, P211, P210, P201, P102, P101
Documents
Manual
PDF, 262,76 KB
Brochure
PDF, 415,24 KB
Datasheet
PDF, 267,05 KB
Safety datasheet
PDF, 164,39 KB
Item no.: 52392
Item no.: 52392
Safety datasheet
PDF, 165,56 KB
Item no.: 52371
Item no.: 52371
Accessories
-29%
INTERNATIONAL
SUPER CLEANER
€14.24
only
€10
04
> 100
YACHTCARE
Dust Cloth
only
€3
78
78
HEMPEL
LIGHT PRIMER SPRAY 2-Part Epoxy Primer
only
€27
69
17
3M
Premium Respirator Mask
only
€7
52
> 100
3M
Safety Goggles
only
€11
72
51
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Similar items
NEW
SEAJET
Biocide-free PELLER CLEAN Antifouling Protection / 325 ml
€89.03
only
€80
63
10
NEW
SEAJET
EMPEROR A 034 Antifouling Spray
€26.85
from
€25
17
2 variants
Antifouling Spray / transparent
only
€18
45
HEMPEL
SilicONE Propeller Kit / black / incl. LIGHT PRIMER
only
€67
18
18
-13%
YACHTICON
Anti Barnacle Grease Spray
€11.55
only
€10
04
-10%
JOTUN
AQUALINE OPTIMA Propeller Antifouling
€40.25
from
€36
09
2 variants
-26%
YACHTICON
Anti Barnacle Grease
€18.03
only
€13
40
81
-46%
INTERNATIONAL
PROP-O-DREV Propeller Antifouling
€54.56
from
€29
37
2 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!