Product details

This foldable solar module with charge regulator impresses with its high energy yield, low weight and ability to fit into small spaces.

Folded up in the textile frame, this module is an inconspicuous companion, which is quickly ready for use. The textile module carrier features riveted eyelets, which can be used to fix the module in place, e.g.. with a rubber cord or ratline. Of course, the module can very easily be laid out. In addition, it has installation supports which are held on the module support by Velcro straps when not in use and with the help of which the module can also be aligned to low sunlight.
In the outer compartment of the textile module carrier, there are the ready-wired module connections with approx. 4.5 m cable, the PHOCOS CMLup 10 solar controller and approx. 1.4 m battery connection cable with adapter plug connection. Matching the adapter plug connection and also included in delivery: three approx. 1 m long adapter cables with alligator clips, ring cable lugs (5 mm inner Ø) and cigarette lighter plug. The cigarette lighter plug features a 10 A micro fuse. Length of the battery connection cable incl. regulator and adapter cable approx. 7 m. The controller's 5 V USB output can be used to power mobile devices such as smartphones, tablets, cameras, etc.

Technical data:
System voltage 12 V
Rated output 120 W (3 x 40 W)
Current at max. output 6.1 A
Operating temperature -40 °C to +85 °C
Frame Textile
Module cable 4500 mm / 2.5 mm²
Battery cable 500 mm / 3 mm²
Unfolded dimensions 1280 x 540 x 4 mm
Folded dimensions 540 x 410 x 20 mm
Weight 2.9 kg
Charging controller 12 V DC / 10 A
Charge controller output 5 V DC / 800 mA
Certifications CE, RoHS

Notes
  • When using an alligator clip adapter or ring cable lug adapter, we also recommend fitting a 10 A fuse close to the battery (max. 20 cm).
    Fuse holders and micro fuse holders are optionally available.
  • Although the PHOCOS MLPup controller used is capable of detecting 12 or 24 volt battery systems, the module can only be used in 12 volt on-board systems due to the 17.6 Vmp output voltage.
  • The controller is not splash-proof and must therefore be stored in a dry environment!
  • Further technical data of the controller can be found within the operating instructions.
    The instructions can be found in the documents below.
  • Please observe the instructions in the operation manual!

Documents

multi-flag Datasheet
PDF, 373,30 KB
multi-flag Datasheet
PDF, 1,34 MB
multi-flag Manual
PDF, 2,73 MB
multi-flag Manual
PDF, 2,02 MB
multi-flag Manual
PDF, 946,23 KB

What other SVB customers have to say

100% real reviews

2 customer reviews

5 (out of 2 ratings)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Stars
(0)
Olaf K.
by Olaf K. Flag of Germany 7/5/2019 Verified purchase
Everything OK ....
Uwe S.
by Uwe S. Flag of Germany 7/28/2017 Verified purchase
Solarmodul
Has fully met my expectations. Can be flexibly used with crocodile clamps, covers the daily requirement on the Mediterranean of a normal yacht.

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Français

Technical question

Question:
User image of Artur A.
Artur A. asked
on Feb 2, 2020
Flag of English Hi everybody! Tall my pls, is the PHOCOS MLPup controller MPPT or PGM type? Danke schön!!!
Answer:
User image of W P.
W P. answered
on Feb 14, 2020
Hi Artur, the regulator is a PWM type.