EPIFANES BLACK BOTTOM Semi-Gloss Boat Coating
Item no.
53785
EAN
8715559873051
Model no.
E5-36A
Description
EPIFANES - Marine paint BLACK BOTTOM
Colour
Black
Yield (theoretical)
10
m²
Finish
Semi-gloss
No. of components
1 component
Method of application
Roller, Brush, Spray gun
No. of coats (recommended)
3 - 5
For substrate
Wood, Steel
SVB recommends the following for these items
Product details
BLACK BOTTOM is a flexible, high-quality marine paint for below the waterline. The paint can also be used for the repair or maintenance of existing tar colours. Can also be used above the water line. BLACK BOTTOM can be easily processed, is elastic and resistant to UV-rays, water and air. Dust-dry after 2 hours and fully dry after 12 hours. Several layers can be applied (each at 20°C). Coverage: 10 m² per liter at 50 µm dry film thickness. The effective coverage can vary depending on many factors, such as application methods, surface conditions, absorbency of the wood, conditions while processing, material loss, etc. Base: bitumen. Colour: black. Gloss: semi-gloss. Density: 0.97 kg/dm ³. Available in 1 liter and 4 liter containers.
Processing instructions
Remove growth from the substrate and carefully degrease. Sand the surface thoroughly, clean well and allow to dry. Remove rust and dust before application. Then apply 3-5 coats of Black Bottom.
Above the waterline: 3 coats of Black Bottom
Below the waterline: 5 coats of Black Bottom
Application on steel / Old coatings:
Dilute the first coat 25 % with a paint thinner. Dilute further coats by 0-10 % and apply.
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 12 hours
Processing temperature: +10 °C to max. 28° C
Processing instructions
Remove growth from the substrate and carefully degrease. Sand the surface thoroughly, clean well and allow to dry. Remove rust and dust before application. Then apply 3-5 coats of Black Bottom.
Above the waterline: 3 coats of Black Bottom
Below the waterline: 5 coats of Black Bottom
Application on steel / Old coatings:
Dilute the first coat 25 % with a paint thinner. Dilute further coats by 0-10 % and apply.
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 12 hours
Processing temperature: +10 °C to max. 28° C
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not breathe dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Do not breathe dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Dispose of contents/container to …
H226, H336, H411, P102, P210, P260, P271, P280, P301+P310, P303+P361+P353, P501
Documents
Datasheet
PDF, 590,90 KB
Brochure
.PDF, 9,68 MB
Datasheet
PDF, 336,65 KB
Safety datasheet
PDF, 333,03 KB
Accessories
Customers also bought
-41%
INTERNATIONAL
INTERDECK Non-Slip Topcoat
€45.42
from
€26
85
5 variants
EPIFANES
One-Component Clear High-Gloss Boat Varnish for Wood
from
€18
45
3 variants
HEMPEL
SILIC ONE Biocide-Free Antifouling
from
€53
74
3 variants
EPIFANES
Paint Thinner
only
€15
08
> 100
-46%
INTERNATIONAL
MICRON 350 Self-Polishing Antifouling
€93.91
from
€50
38
11 variants
-17%
Spare Blade Set for Paint Scraper
€18.24
only
€15
08
77
-13%
OWATROL
Rust Sealant and Anti-Rust Primer C.I.P. / 0.75 l
€38.45
only
€33
57
71
Round Magnesium Anodes
from
€9
20
6 variants
Similar items
EPIFANES
1-Component High-Gloss Boat Paint / various colours
from
€27
69
11 variants
-35%
INTERNATIONAL
TOPLAC PLUS High Gloss One-Component Boat Paint
€25.82
from
€16
76
28 variants
-7%
EPIFANES
One-Component High-Gloss Waterline Boat Paint
€16.30
from
€15
08
6 variants
HEMPEL
BRILLIANT GLOSS One-Component Top Coat
from
€15
92
13 variants
-36%
INTERNATIONAL
SUPER GLOSS HS High Gloss One-Component Boat Varnish
€42.97
from
€27
69
13 variants
-8%
EPIFANES
MONO-URETHANE One-Component High Gloss Boat Paint
€34.70
from
€31
89
24 variants
HEMPEL
MULTICOAT One-Component Satin Matt Boat Varnish
from
€19
29
8 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!