SVB recommends the following for these items
Remove growth from the substrate and carefully degrease. Sand the surface thoroughly, clean well and allow to dry. Remove rust and dust before application. Then apply 3-5 coats of Black Bottom.
Above the waterline: 3 coats of Black Bottom
Below the waterline: 5 coats of Black Bottom
Application on steel / Old coatings:
Dilute the first coat 25 % with a paint thinner. Dilute further coats by 0-10 % and apply.
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 12 hours
Processing temperature: +10 °C to max. 28° C
Please note the following hazard warnings:
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .