EPIFANES 2-Component High-Gloss Poly Urethane Boat Paint 750 ml
Article Number
53892
Model no.
E4-800
Description
EPIFANES - 2-C poly-urethane high gloss boat varnish
Contents
750
ml
Yield (theoretical)
9
m²
Finish
High gloss
No. of components
2 components
Method of application
Roller, Brush, Spray gun
No. of coats (recommended)
3
For substrate
GRP, Wood, Steel, Aluminium
SVB recommends the following for these items
Product details
This high-gloss, 2 component poly-urethane boat paint from Epifanes leaves a long-lasting shine and provides excellent weather and water resistance. Suitable as a top coat on 2-component primer systems for use in fresh and salt water areas. Can be applied directly, without adhesive primer, to thoroughly degreased and sanded polyester surfaces. With excellent, smooth flowing properties, perfect for application with a roller / brush and with a spray gun. Available in different colours. Contents: 750 ml.
Processing instructions
For coated surfaces:
Remove growth from the substrate and carefully degrease. Sand the surface thoroughly, clean well and allow to dry. Remove rust and dust before application. Then apply Poly Urethane.
For uncoated surfaces:
GRP: Apply 1-2 coats of Poly-urethane primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Steel: Apply 3 coats of a 2-part primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Wood: Apply 1-2 coats of a 2-part primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Aluminium: Apply 1-2 coats of a 2-part primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 24 hours
Processing temperature: +12 °C to max. 28° C
Processing instructions
For coated surfaces:
Remove growth from the substrate and carefully degrease. Sand the surface thoroughly, clean well and allow to dry. Remove rust and dust before application. Then apply Poly Urethane.
For uncoated surfaces:
GRP: Apply 1-2 coats of Poly-urethane primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Steel: Apply 3 coats of a 2-part primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Wood: Apply 1-2 coats of a 2-part primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Aluminium: Apply 1-2 coats of a 2-part primer. Allow the primer to dry and sand with 220 grit. Then apply poly-urethane.
Drying time at 20 °C: 2 hours
Processing time at 20 °C: min. 24 hours
Processing temperature: +12 °C to max. 28° C
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Causes skin irritation.
May cause damage to organs through prolonged or repeated exposure.
Causes serious eye irritation.
Harmful in contact with skin.
May cause respiratory irritation.
Harmful if inhaled.
May cause an allergic skin reaction.
Flammable liquid and vapour.
Highly flammable liquid and vapour.
May be fatal if swallowed and enters airways.
Toxic if inhaled.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep container tightly closed.
Do not breathe dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
Dispose of contents/container to …
May cause damage to organs through prolonged or repeated exposure.
Causes serious eye irritation.
Harmful in contact with skin.
May cause respiratory irritation.
Harmful if inhaled.
May cause an allergic skin reaction.
Flammable liquid and vapour.
Highly flammable liquid and vapour.
May be fatal if swallowed and enters airways.
Toxic if inhaled.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep container tightly closed.
Do not breathe dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
Dispose of contents/container to …
H315, H373, H319, H312, H335, H332, H317, H226, H225, H304, H331, H334, P102, P210, P233, P260, P271, P280, P301+P310, P501
Documents
Safety datasheet
PDF, 145,90 KB
Safety datasheet
PDF, 167,73 KB
Datasheet
PDF, 430,05 KB
Safety datasheet
PDF, 264,20 KB
Safety datasheet
PDF, 267,26 KB
Safety datasheet
PDF, 161,30 KB
Safety datasheet
PDF, 171,40 KB
Accessories
YACHTCARE
Dust Cloth
only
€3
78
78
EPIFANES
2-Part Polyurethane Primer
from
€37
77
6 variants
-7%
EPIFANES
Brush Thinner for 2-Component Polyurethane Boat Paint
€25.30
only
€23
49
40
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Varnishing Flat Brushes 25 mm / 50 mm
from
€21
81
2 variants
Varnishing Flat Brushes
from
€3
28
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
-17%
Mini Polishing and Grinding Machine, battery-powered
€100.80
only
€83
99
3
Customer images (2) from all reviews
Customers also bought
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€7
14
6 variants
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from
€20
97
5 variants
Mixing Cups with Lid
from
€0
80
2 variants
-9%
EPIFANES
Multi Marine One-Component Primer
€27.70
from
€25
17
4 variants
TIKAL
TIKALFLEX Contact 12 Adhesive / Sealant
from
€5
84
5 variants
EPIFANES
Paint Thinner
only
€15
08
82
WEST SYSTEM
Fast Hardener 205 and Epoxy Resin 105 / 1.2 kg
only
€58
78
98
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
-
-
Technical question
Question:
David P.
asked
on Mar 16, 2023
Hi, I am considering ordering some Epiphanes Polyurethane but I am not sure about the colour. There are 3 whites but cannot make out on the computer which is the whiter of the 3. Previously I have been using International Snow white so would be looking for the closest match. Can you please advise. Many thanks in advance, David Pike.
Answer:
Hallo David, because these are two different manufacturers, the colors cannot be compared. Please send us a inquiry ( Info@SVB.de) for a color guide, so you are able to make a coice by yourself. Or you use the same color -#40664#- like the last time, so you will be sure. Yours SVB-team.
