ENGEL 12 V DC - Spare Cable for ENGEL Coolers

Reset image position
Close
Back
Item no. 61032
Only 5 in stock
pcs.
SVB price: €58.78
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
pcs.
€58.78 This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
Buy
Article Number
61032
Model no.
191240400
Description
ENGEL - Spare Cable
Length
3 m

Product details

12 volt DC connection cable with 3-pin plug for ENGEL coolers and cigarette lighter plugs, equipped with a special fuse with reverse polarity protection.
The front part of the cigarette lighter plug and the special fuse allow for the cooler to be connected to the 12 V DC electrical system. Without the front part, the cable can also be connected to a 24 V DC electrical system.

Details
  • Cable length: 3 metres
  • Wire cross-section: 2 x 1.31 mm² (16AWG)
  • Special fuse with reverse polarity protection inside the cigarette lighter plug
  • Permissible system voltage:
    • With cigarette lighter plug and special fuse only at 12 volts!
    • Without plug adapter also at 24 volts.
      • Please pay attention to the correct polarity.
      • Install a fuse on the POSITIVE wire near the battery (see below).


Information
  • Only use the special fuse with reverse polarity protection provided by ENGEL.
  • Please pay attention to the polarity of the voltage source.
    • The tip of the cigarette lighter plug is the POSITIVE connector.
      The side contacts are NEGATIVE.
    • If the cooler is to be operated with 24 V DC, the front part of the cigarette lighter plug must be removed.
      As a result, there is no protection and no reverse polarity protection!
  • The circuit of the cooling unit must be protected by a fuse.
    The fuse must be mounted as close as possible to the voltage source.
    Please consult the manufacturer's notes in the operating manual for the cooler.
    Unless otherwise specified, use 15A at 12 volts and 10A at 24 volts.
  • Make sure to use sufficiently dimensioned wire cross sections for the cooling unit circuit.
  • Supplied with a second screw cap for the cigarette lighter plug. If the cigarette lighter plug does not fit into the socket, remove the front screw cap of the plug first.

Documents

de-flag Drawing
PDF, 447,91 KB
multi-flag Drawing
PDF, 57,94 KB

What other SVB customers have to say

100% real reviews
Nobody has rated this product yet

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!