DST810 Through-Hull Transducer / NMEA2000 / Bluetooth
This product is no longer available.
But a successive product is available:
But a successive product is available:
SVB recommends the following for this item
Product details
The DST810 plastic thru-hull transducer reliably and precisely measures depth, speed and temperature readings in the water. Thanks to NMEA2000 and Bluetooth connectivity, data can be displayed in a variety of ways. The sensor can also be calibrated quickly and easily via the Bluetooth interface using the Airmar Cast App. The device can measure depths up to 100 m, speeds up to 45 knots and temperatures up to +40 °C. A 5 Hz signal output ensures smooth playback on your display device.
Wireless connection via Bluetooth also allows easy calibration of sensor data via the Airmar Cast app.
Airmar CAST™ App Views
Note
Smartphone not included
Wireless connection via Bluetooth also allows easy calibration of sensor data via the Airmar Cast app.
Technical Data
Frequency | 235 kHz |
Performance | 100 W |
Beam width | 10 x 44 degrees |
Hull deadrise | 0 to 22 degrees |
Min. depth | 0.5 m |
Max. Depth | 100 m |
Max. speed | 45 knots |
Temperature sensor measuring range | -10 to +40° C |
Bluetooth | Yes |
Connectors | NMEA2000 / Micro-C (male) |
Cable Length | 6 m |
Weight: | 0.9 kg |
Drill hole diameter | 51 mm |
Note
Smartphone not included
Documents
Accessories
NMEA2000
NMEA2000 T-Piece / Micro-C
only
€17
61
> 100
NMEA2000
NMEA2000 4-way Splitter / Micro-C
only
€56
26
66
NMEA2000
NMEA2000 Terminal Resistor / male / micro-C
only
€9
20
27
NMEA2000
NMEA2000 Terminal Resistor / female / micro-C
only
€10
04
15
NMEA2000
NMEA2000 Power Cable incl. Fuse
only
€31
05
14
NMEA2000
NMEA2000 Plug, Female / Micro-C
only
€25
17
38
NMEA2000
NMEA2000 Plug, Male / Micro-C
only
€25
17
85
NMEA2000
NMEA2000 2-way distributor / Micro-C
only
€41
97
45
NMEA2000
NMEA2000 Network Cable with 90° Connection
from
€20
97
2 variants
NMEA2000
NMEA2000 network cable with one-sided plug / 1 m / micro-c
only
€17
61
76
NMEA2000
NMEA2000 Wall Duct / micro-c
only
€37
77
43
NMEA2000
NMEA2000 Network Cable / price per meter
only
€5
84
34
NMEA2000
NMEA2000 Starter Kit / Micro-C
only
€109
20
> 100
NMEA2000
NMEA2000 Dummy Cap / male / micro-c
only
€5
84
80
NMEA2000
NMEA2000 Dummy Cap / female / micro-c
only
€5
84
71
See subsequent models of this product
Customers also bought
Wood Thru-Hull Plugs / Ø 10-40 mm
only
€6
68
> 100
-12%
B&G
TRITON²
€515.00
only
€453
74
NMEA2000
NMEA2000 T-Piece / Micro-C
only
€17
61
> 100
NMEA2000
NMEA2000 Network Cable / Micro-C
from
€20
13
6 variants
NMEA2000
NMEA2000 4-way Splitter / Micro-C
only
€56
26
66
NMEA2000
NMEA2000 Starter Kit / Micro-C
only
€109
20
> 100
WHALE
Connect Plumbing System / angled connector
only
€5
00
> 100
Similar items
-31%
AIRMAR
DST810 Gen2 Through-hull Transducer / NMEA2000 / Bluetooth
€557.65
only
€386
51
13
-9%
RAYMARINE
DST810 GEN2 Through-Hull Transducer / SeaTalkNG / Bluetooth
€425.00
only
€386
51
3
-10%
GARMIN
P79 In-Hull Transducer / NMEA2000
€402.52
only
€361
30
3
-6%
GARMIN
GDT43 Through-Hull Transducer / NMEA2000
€268.07
only
€252
06
1
GARMIN
GST43 Through-Hull Transducer with GST10 NMEA2000 Adapter
only
€167
18
-25%
AIRMAR
UDST800 Ultrasonic Triducer / NMEA2000
€1,814.91
only
€1.361
30
4
-9%
RAYMARINE
DT800 Plastic Through-Hull Transducer
€375.00
only
€340
29
2
-11%
RAYMARINE
P79S In Hull Transducer / with SeaTalkNG Adapter
€395.00
only
€352
90
-14%
AIRMAR
Triducer / NMEA0183
€618.09
only
€529
37
8
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Question about delivery contents
Answer:
Hi Carsten! You can always check the availability on top of the page underneath the SVB price.
Technical question
Answer:
Hello Jay, This one also not. It is the replacement of DST800
Question:
Piotr B.
asked
on Aug 24, 2021
Hello. Is dst810 compatible with raymarine i40 bidata? If so, can I purchase i40 without transducers? (I see that you only have i40 bidata as a set with depth and speed transducers). Thank You, and Have a good day!
Answer:
Dear customer please email info@svb24.com in this case.
Answer:
Dear customer please email info@svb24.com in this case.
Question:
Emre D.
asked
on Aug 9, 2022
I have airmar ıdst n2000 tranducer.
My chartplotter is Garmin Gps map 4008.
My first question: Is this product available for Garmin map 4008 Chartplotter.
My second question: Is this product fit to my old idst n2000 tranducer's fittings and can I use my existing cable.
Answer:
Dear customer please email info@svb24.com in this case.
Question:
Emre D.
asked
on Aug 10, 2022
Hello I have old transducer airmar idst 2000 and it doesn't work . I can't see the depts over 12 meters.
I want to buy airmar dst 800 or dst 810.
My chartplotter is Garmin Gps Map 4008.
Which product from your website can I buy for my chartplotter. Can you send me the link available for my chartplotter.
And I want to learn can I use the same cable of my old transducer and also I want to learn is this product fits to my old transducers fittings.
Answer:
Dear customer please email info@svb24.com in this case.
Question:
Emre D.
asked
on Aug 10, 2022
Hello I have old transducer airmar idst 2000 and it doesn't work . I can't see the depts over 12 meters.
I want to buy airmar dst 800 or dst 810.
My chartplotter is Garmin Gps Map 4008.
Which product from your website can I buy for my chartplotter. Can you send me the link available for my chartplotter.
And I want to learn can I use the same cable of my old transducer and also I want to learn is this product fits to my old transducers fittings.
Answer:
Dear customer please email info@svb24.com in this case.
General question
Answers:
Hi Lasse, there is a 6 meter NMEA2000 Micro-C (male) directly mounted at the transducer. So you can connect the DST810 to an existing NMEA2000 network using a T-Piece (Art.: 61034) or in case you don´t have an NMEA2000 network, we recommend using our NMEA2000 certified Starter-Kit (Art.: 85422).
You have mailed me in order to have ME answer a question raised by YOUR customer. I find this quite daring given that my own question some weeks ago was turned down because the mater in question was of too low value. You should begin to do you own work and give the costumers the service they deserve.
Dear Jorgen, thanks for your feedback. The idea of this platform is "Customers ask Customers", which gives our clients a valuable place whereby they can share first-hand information and tips to others regarding articles which they have already purchased and have experience with. Of course, we (the specialists) also receive notifications and share our knowledge as well (as Felix has done above). In regards to your recent question by email, my colleague had to refer you to the manufacturer as we were not able to provide support for that particular part. Thank you, Your SVB Team