DOMETIC MCA-TS1 Temperature Sensor
Item no.
27070
EAN
4015704251036
Model no.
9600000099
Type
MCA-TS1 Temperature Sensor
Product details
DOMETIC TS-1 temperature sensor, suitable for MCA chargers & DCC charging converters, pre-assembled with 7.5 m connection cable.
As a general rule, if you have maintenance-free lead/acid, GEL or AGM batteries on board and these batteries are located, for example, in the hot engine compartment, you should consider charging the batteries at a suitable temperature.
The parameters of modern chargers are adapted to battery temperatures of 20 - 25 °C (room temperature).
If there are large temperature deviations, there is a danger that the batteries may begin to emit gases at higher temperatures* or that the charging voltage at low temperatures is insufficient for optimum charging.
The use of a temperature sensor provides a solution. This senses the battery temperature and controls the level of the charging voltage to the optimum value.
Use the DOMETC TS-1 to upgrade your DOMETIC MCA or DCC chargers for temperature-adjusted battery charging. Installation is very simple. The metal plate of the sensor is screwed to the PLUS or MINUS battery terminal. Run the 7.5 meter long cable to the charger and plug it into the charger's sensor socket - done! The charger takes care of the rest without you having to do a thing.
*Gases mean that the battery loses water. With maintenance-free lead/acid or closed valve-regulated GEL or AGM batteries, this can be seen as premature wear and tear, as no distilled water can be refilled with these battery types.
As a general rule, if you have maintenance-free lead/acid, GEL or AGM batteries on board and these batteries are located, for example, in the hot engine compartment, you should consider charging the batteries at a suitable temperature.
The parameters of modern chargers are adapted to battery temperatures of 20 - 25 °C (room temperature).
If there are large temperature deviations, there is a danger that the batteries may begin to emit gases at higher temperatures* or that the charging voltage at low temperatures is insufficient for optimum charging.
The use of a temperature sensor provides a solution. This senses the battery temperature and controls the level of the charging voltage to the optimum value.
Use the DOMETC TS-1 to upgrade your DOMETIC MCA or DCC chargers for temperature-adjusted battery charging. Installation is very simple. The metal plate of the sensor is screwed to the PLUS or MINUS battery terminal. Run the 7.5 meter long cable to the charger and plug it into the charger's sensor socket - done! The charger takes care of the rest without you having to do a thing.
*Gases mean that the battery loses water. With maintenance-free lead/acid or closed valve-regulated GEL or AGM batteries, this can be seen as premature wear and tear, as no distilled water can be refilled with these battery types.
Customers also bought
Stainless Steel Hose Clamps
from
€1
76
18 variants
-16%
DOMETIC
PerfectCharge MCA1225 Charger
€331.93
only
€277
27
1
-10%
YACHTCARE
LEAK HERO Sealant / 625 ml
€33.45
only
€30
21
> 100
-10%
DOMETIC
MCA-RC1 Remote Control
€61.34
only
€55
42
2
-12%
DOMETIC
PerfectCharge MCA1235 Charger
€415.97
only
€366
34
2
-12%
DOMETIC
PerfectCharge MCA1250 Charger
€494.96
only
€436
93
1
-12%
DOMETIC
PerfectCharge MCA1215 / 12V / 15A Charging Device
€239.50
only
€210
04
2
Similar items
-8%
MASTERVOLT
Temperature Sensor for ChargeMaster (+) / CombiMaster / MassCombi Ultra/Pro
€50.35
only
€46
18
NEW
STERLING
Bidirectional B2B Charger Remote Control
only
€105
00
NEW
DIGITAL YACHT
veKonvert Victron VE.Direct to NMEA2000 Gateway / Micro-C
€190.00
only
€176
43
-7%
VICTRON
Color Control GX Display Remote Control
€462.00
only
€428
53
1
-7%
VICTRON
AC Power Cord for Smart IP43 / Phoenix Chargers
€9.00
only
€8
36
32
CRISTEC
Connection Kit for Parallel Operation of two HPower Chargers
only
€46
18
2
CRISTEC
DC Output Connector for all 60 A YPower chargers
only
€54
58
8
CRISTEC
DC Output Connector for all YPower chargers except 60A
only
€21
81
7
WAGO WINSTA AC Input Connector for YPower chargers
only
€11
72
13
CRISTEC
Battery Temperature Sensor Probe / cable length: 5 m
only
€47
86
3
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Per E.
asked
on Aug 7, 2022
I have a Dometic charger installed, and are considering to buy the MCA-TS1 temperature sensor for security purpose. I.e. if the battery is overheated I want the charger to shut off charging. Is the sensor usable for this purpose?
Answer:
MCA charger can monitor the temperature of the battery with the TS-1. At 52°C ± 5 °C the unit goes into a protective function and signals this by fast red flashing of the indicator LED.