Corrosive Inhibiting Primer C.I.P.
This product is no longer available.
But a successive product is available:
But a successive product is available:
Product details
Rust inhibiting primer for single and two-components paints
OWATROL® C.I.P. is a universal rust binding primer for all paint types. It will not dissolve or break down when high solvenst paints applied to it. Penetrates and stabilises the surface, forming a solid stable layer that other coatings can firmly adhere to. Pigmentation offers increased protection and perfect film-forming qualities. Easy to use, no need for sanding or sandblasting. Use on new or rusted surfaces, interior and exterior.
Where to use: C.I.P. (Corrosion Inhibiting Primer) is recommended for all severe environmental conditions: marine or tropical climates, corrosive fumes, construction equipment and ballast tanks... C.I.P. is especially recommended where a high resistant paint or two-components finish (urethane, epoxy, chlorinated rubber, synthetic, etc.) is to be applied or necessary.
Recommendations before application: Shake or stir paint well before and during use. Do not dilute. Remove all loose and flaking rust, mill scale and old paint back to a sound surface using a wire brush or scraper. It is not necessary to remove all firmly adhered rust. Surfaces exposed to chemicals (salts, acids, alkalis...) should be washed with water or steam cleaned. Severely contaminated surfaces should be cleaned using the appropriate solvent. Before application, ensure surface is clean, dry and free from oil, grease and other surface contaminants.
Recommendations: with C.I.P. sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.
- coverage: 15 m²/l
- application temperature: +5°C to +30°C
- drying: about 6 h
- recoating time: about 72 h
Documents
Datasheet
.PDF, 891,55 KB
Item no.: 54512
Item no.: 54512
Certificate
.PDF, 110,10 KB
Item no.: 54512
Item no.: 54512
Datasheet
PDF, 50,38 KB
Datasheet
.PDF, 274,83 KB
Item no.: 54512
Item no.: 54512
Safety datasheet
PDF, 115,31 KB
Datasheet
.PDF, 1,93 MB
Item no.: 54512
Item no.: 54512
Datasheet
.PDF, 848,42 KB
Item no.: 54512
Item no.: 54512
Datasheet
.PDF, 337,64 KB
Item no.: 54512
Item no.: 54512
by Johann S.
12/26/2017
Verified purchase
12/26/2017
Verified purchase
by Aiko S.
8/7/2017
Verified purchase
8/7/2017
Verified purchase
See subsequent models of this product
Customers also bought
Similar items
SPRENGER
PROP SPRAY 400 ml / grey
only €16
76
EPIFANES
2-Part Poly-Urethane Primer
from €37
77
YACHTCARE
Anchoring Antifouling
from €41
13
€51.95
-21%
EPIFANES
CR One-Component Underwater Primer
from €31
05
JOTUN
YACHTING VINYL PRIMER Spray
only €28
53
EPIFANES
Multi Marine One-Component Primer
from €25
17
€27.70
-9%
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!