Product details

The LED light COLOMBO is equipped with white and red LEDs. It has an extremely low power consumption. Switch: on / off / on – you can switch the white and red LEDs separately. Bulbs included.

Operating voltage: 12V DC
Light: LED (fixed)
Wattage: 2 watts (white) / 1 watt (red)
Power consumption: 0.17A @ 12V (white) or 0.08A @ 12V (red)
Housing material: Plastic (white)
Outside Ø :: approx. 140mm
Height: 28mm

Installation instructions

To install the light, the "lens" must first be removed. You will need a small, slotted screwdriver to do this. The lens is attached to the light housing via a snap-in lock. Take care when handling! There are 3 small slots on the edge of the lens, each 120° apart from the other. To open, carefully insert the small screwdriver into one of the slots, raise the "glass" slightly and then remove it completely.

Replace the lens in reverse order. Make sure that the 3 snap hooks are positioned above the 3 locking catches on the housing and push the "glass" onto the base until it is locked again in all 3 positions.


en-flag Manual
.PDF, 1,77 MB
Item no.: 15574

What other SVB customers have to say

100% real reviews

16 customer reviews

Boldea A.
by Boldea A. Flag of Romania 2/2/2022 Verified purchase
What I need
For the actual price evrithing is ok! SVB the best!
Raffaele D.
by Raffaele D. Flag of Italy 2/10/2021 Verified purchase
Good but the courier was very slow
by Anonymous 8/25/2012
Good workmanship, fast installation, pleasant bright white light, both light intensities red and white. good.

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!