lang-en
Deutsch
Nederlands
Français
Italiano
Español
Show all results for:

Related search terms

Technical support: +49 (0)421-57290-0

Pre-spliced ropes

Rope work by SVB: running rigging ropes require to be done by experienced riggers to achieve perfect splices which keep breaking strength of the line at its original level and for a good and low friction circulation in deck hardware such as blocks and cleats. Our riggers work with ropes made of the best fibers. We can advise you on the ropes construction and fibers for each line.  
With modern fibers such as Dynnema and Vectran, sheet and halyard diameters can be greatly reduced compared to polyester lines. That means saving weight and reducing friction on deck hardware (blocks and cleats). Their fantastic breaking load figures are shown by benchmark tests and also by the personal experiences collected from many users. Feel free to call us for advice when you need new running rigging or simply when you need to replace a line and are thinking of upgrading to high modulus fiber. 
 
The table below shows our recommendations for sheets and halyards depending on the sail area
m²  Cruise XP Dyna One Dyneema Discover Dyna Lite Cup Gemini X Tasmania Harkon Standard Wire 7x19
10 5 4 5 6 6 8 6 8 8 8 3
20 6 4 6 8 8 10 8 10 10 10 3
30 8 4 8 10 10 12 10 12 12 12 4
40 10 4 10 12 12 12 12 12 12 14 4
50 12 5 12 12 12 14 12 14 14 16 5
60 12 5 12 12 14 14 14 14 14 16 5
70 14 6 14 14 14 14 16 16 6
80 14 8 14 16 16 14 16 16 7
90 16 8 16 16 16 18 8
100 16 10 16 20 20 10

Mooring, towing and anchor ropes.
These ropes must withstand pulsating loads. There are high demands on the strength and elasticity of the ropes. If the forces are transmitted undamped, the lines can break early or the fittings can burst. The desired elastic force absorption occurs through the selection of raw materials and the corresponding production techniques. Low-stretch polyester with proper cable construction for the manufacture of mooring and anchor lines in particular.
 
Rope diameter for mooring-, spring-, anchor- and towline
Boat length Polyester mooring Bavaria mooring Polyamid mooring GeoSqare mooring Hempex mooring
6 m 10 mm 8 mm 8 mm 8 mm 14 mm
8 m 12 mm 10 mm 10 mm 10 mm 16 mm
10 m 14 mm 12 mm 12 mm 12 mm 20 mm
12 m 16 mm 14 mm 14 mm 14 mm 22 mm
14 m 18 mm 16 mm 16 mm 16 mm 26 mm
16 m 22 mm 18 mm 18 mm 18 mm 28 mm
18 m 24 mm 18 mm 20 mm 18 mm 28 mm
20 m 26 mm 20 mm 22 mm 20 mm 32 mm
22 m 28 mm 20 mm 26 mm 20 mm 32 mm
more Information
RIVIERA-Sheet
Product image
GLEISTEIN RIVIERA-Sheet
16.95 EUR In stock from €16.95
GENOA sheet with rope shackle
Product image
GENOA sheet with rope shackle
89.95 EUR In stock from €89.95
Headsail Sheet System
Product image
Headsail Sheet System
89.95 EUR In stock from €89.95
ADRIA-Sheet
Product image
GLEISTEIN ADRIA-Sheet
16.95 EUR In stock from €16.95
Pre-Spliced Halyard with snap-shackle
Product image
Pre-spliced Sheet for Headsail
Product image
Polypropylene Rope
Product image

Pre-spliced ropes

Rope work by SVB: running rigging ropes require to be done by experienced riggers to achieve perfect splices which keep breaking strength of the line at its original level and for a good and low friction circulation in deck hardware such as blocks and cleats. Our riggers work with ropes made of the best fibers. We can advise you on the ropes construction and fibers for each line.  
With modern fibers such as Dynnema and Vectran, sheet and halyard diameters can be greatly reduced compared to polyester lines. That means saving weight and reducing friction on deck hardware (blocks and cleats). Their fantastic breaking load figures are shown by benchmark tests and also by the personal experiences collected from many users. Feel free to call us for advice when you need new running rigging or simply when you need to replace a line and are thinking of upgrading to high modulus fiber. 
 
The table below shows our recommendations for sheets and halyards depending on the sail area
m²  Cruise XP Dyna One Dyneema Discover Dyna Lite Cup Gemini X Tasmania Harkon Standard Wire 7x19
10 5 4 5 6 6 8 6 8 8 8 3
20 6 4 6 8 8 10 8 10 10 10 3
30 8 4 8 10 10 12 10 12 12 12 4
40 10 4 10 12 12 12 12 12 12 14 4
50 12 5 12 12 12 14 12 14 14 16 5
60 12 5 12 12 14 14 14 14 14 16 5
70 14 6 14 14 14 14 16 16 6
80 14 8 14 16 16 14 16 16 7
90 16 8 16 16 16 18 8
100 16 10 16 20 20 10

Mooring, towing and anchor ropes.
These ropes must withstand pulsating loads. There are high demands on the strength and elasticity of the ropes. If the forces are transmitted undamped, the lines can break early or the fittings can burst. The desired elastic force absorption occurs through the selection of raw materials and the corresponding production techniques. Low-stretch polyester with proper cable construction for the manufacture of mooring and anchor lines in particular.
 
Rope diameter for mooring-, spring-, anchor- and towline
Boat length Polyester mooring Bavaria mooring Polyamid mooring GeoSqare mooring Hempex mooring
6 m 10 mm 8 mm 8 mm 8 mm 14 mm
8 m 12 mm 10 mm 10 mm 10 mm 16 mm
10 m 14 mm 12 mm 12 mm 12 mm 20 mm
12 m 16 mm 14 mm 14 mm 14 mm 22 mm
14 m 18 mm 16 mm 16 mm 16 mm 26 mm
16 m 22 mm 18 mm 18 mm 18 mm 28 mm
18 m 24 mm 18 mm 20 mm 18 mm 28 mm
20 m 26 mm 20 mm 22 mm 20 mm 32 mm
22 m 28 mm 20 mm 26 mm 20 mm 32 mm

Prices you see are based on delivery to this location:
Germany.

SVB uses Cookies to guarantee you your purchase as simple as possible. Within further usage of our pages, you will accept that we use cookies. Learn more...  Ok