- Using a hot cutter - heating and cooling times -
It takes just a few seconds for the cutter to be hot enough to use. Keep in mind that flammable materials in the workplace can catch fire in as little as 10 seconds, so be careful. The average power consumption of these handy cutters is between 60 and 90 watts. When using a hot cutter to cut rope, the tip of the gun warms up to between 400°C and 600°C, which not only cuts but also seals the rope's edges.
Portable models that can be operated with powerful rope cutter lithium batteries are available if you're looking for a more mobile rope cutter that can be utilised on the go.
Allow at least 60 minutes for the cutter to cool after each use to avoid harm or damage to people, animals, or materials. Leaving it to cool in a safe location away from flammable materials will help prevent damage or injury.
- Using a hot cutter to cut rope -
Please refer to the operating instructions for our products to ensure their safety. Make sure your workplace is clear of any flammable materials before you start using your hot cutter.
The hot knife edge heats up in a few seconds and enables precise cutting of Dyneema rope, polyester coated line and various core types. It can also be used to cut other materials such as synthetic fabrics, belts, cords or textiles.
Never cut material that is under tension.
Jukka T. on 06.08.2022
Fast and reliable. I like to order SVB because there is always enough information where the delivery is going.
ARUNAS S. on 05.08.2022
Fredrik N. on 05.08.2022
Super service och snabb leverans...