Valves & Fittings
In gas and water installation processes, the size of the pipe thread is commonly used. The parameters are given in inches. The diameter of the pipe is also used.
Lever extension for JABSCO diverter valve
-10%
2-Way Valve with Remote Control
-29%
Display Panel Monitored Ball Valve
Spindle Extension for 2-Way Valves
-35%
TRUDESIGN
Spindle Extension for 2-Way Valves
3.10
EUR
€4.80
only €3.10
Brass MS58 Ball Valve with T-Handle
Thru Hulls. Please note that when selecting thru hulls for underwater use, you can only install stainless steel, brass or high-grade plastic thru hulls.
All thru hulls below the waterline should be backed up by shut-off valves, the hoses must be secured with two stainless steel clamps. Above the waterline, you can use thru hulls made out of simple plastic material.
Board bushing with hose connection / brass CR
-6%
Thru-Hull, extra long version / bronze
Thru-Hull with Hose Connection, bronze
Skin Fittings with Hose Adapter
-16%
TRUDESIGN
Skin Fittings with Hose Adapter
9.95
EUR
€11.80
from €9.95
Pipe Elbow 90° female/male, Brass CR
-8%
MAESTRINI
Pipe Elbow 90° female/male, Brass CR
4.50
EUR
€4.87
from €4.50
Pipe Elbow 90° female/female, Brass CR
-10%
MAESTRINI
Pipe Elbow 90° female/female, Brass CR
3.95
EUR
€4.37
from €3.95
Pipe Elbows 90°, female/female, Bronze
MAESTRINI
Pipe Elbows 90°, female/female, Bronze
7.50
EUR
from €7.50
Pipe Elbows 90°, female/male, Bronze
MAESTRINI
Pipe Elbows 90°, female/male, Bronze
6.80
EUR
from €6.80
Hose Connection / female, Brass CR
-7%
MAESTRINI
Hose Connection / female, Brass CR
3.50
EUR
€3.75
from €3.50
Valves & Fittings
| Pipe thread in inches | Outer diameter in mm |
| 1/8" | 9.73 mm |
| 1/4" | 13.16 mm |
| 3/8" | 16.66 mm |
| 1/2" | 20.95 mm |
| 5/8" | 22.91 mm |
| 3/4" | 26.44 mm |
| 7/8" | 30.20 mm |
| 1" | 33.25 mm |
| 1 1/8" | 37.90 mm |
| 1 1/4" | 41.91 mm |
| 1 3/8" | 44.32 mm |
| 1 1/2" | 47.80 mm |
| 1 3/4" | 53.74 mm |
| 2" | 59.61 mm |