lang-en
Deutsch
Nederlands
Français
Italiano
Español
Technical support: +49 (0)421-57290-0

Cart

Thru Hulls

Thru hulls. Please note that within the selection of on board passages meant for underwater use, you can only install diffusers made out of stainless steel, brass or high-grade plastic.
All passages below the waterline should be backed up by shut-off valves, the hoses must be secured with two stainless steel clamps. Above the waterline, you can use diffusers made out of simple plastics.
more Information
Stainless Steel Thru-Hulls
Product image of Stainless Steel Thru-Hulls
Stainless Steel Thru-Hulls
11.95 EUR In stock from €11.95
Thru-Hulls
Product image of Thru-Hulls
Thru-Hulls
19.95 EUR In stock from €19.95
Thru Hulls
Product image of Thru Hulls
Thru-Hulls
Product image of MAESTRINI Thru-Hulls
MAESTRINI Thru-Hulls
6.80 EUR In stock from €6.80
Thru Hull Fitting, Brass CR
Product image of MAESTRINI Thru Hull Fitting, Brass CR
Thru-Hull, Bronze
Product image of MAESTRINI Thru-Hull, Bronze
MAESTRINI Thru-Hull, Bronze
14.95 EUR In stock from €14.95
Intake, stainless steel
Product image of Intake, stainless steel
Intake, stainless steel
17.95 EUR In stock from €17.95
Intake Strainer, Brass CR
Product image of MAESTRINI Intake Strainer, Brass CR
Water Intake, Bronze
Product image of MAESTRINI Water Intake, Bronze
Angular Thru-Hull
Product image of Angular Thru-Hull
Angular Thru-Hull
8.20 EUR In stock from €8.20
Rubber Seals for Through Hulls
Product image of Rubber Seals for Through Hulls
Skin Fittings
Product image of TRUDESIGN Skin Fittings
TRUDESIGN Skin Fittings
8.95 EUR In stock from €8.95
Skin Fittings with Hose Adapter
Product image of TRUDESIGN Skin Fittings with Hose Adapter
Thru-Hull Fittings
Product image of Thru-Hull Fittings
Thru-Hull Fittings
5.50 EUR In stock from €5.50
Stainless Steel Scupper
Product image of Stainless Steel Scupper
Stainless Steel Scupper
44.95 EUR In stock only €44.95
Elbow Screw Connection
Product image of TRUDESIGN Elbow Screw Connection
Intake with Strainer, brass
Product image of MAESTRINI Intake with Strainer, brass
Thru Hull
Product image of Thru Hull
Thru Hull
16.95 EUR In stock only €16.95
Water Inlet Strainer
Product image of TRUDESIGN Water Inlet Strainer
TRUDESIGN Water Inlet Strainer
15.95 EUR In stock from €15.95

Thru Hulls

Thru hulls. Please note that within the selection of on board passages meant for underwater use, you can only install diffusers made out of stainless steel, brass or high-grade plastic.
All passages below the waterline should be backed up by shut-off valves, the hoses must be secured with two stainless steel clamps. Above the waterline, you can use diffusers made out of simple plastics.

SVB uses Cookies to guarantee you your purchase as simple as possible. Within further usage of our pages, you will accept that we use cookies. Learn more...  Ok