Show all results for:

Related search terms

Technical support: +49 (0)421-57290-0

Electrical Switches & Fuses

Seatec - Electrical Panels

Have control over your ship with switchboards made by SEATECAll SEATEC switchboards and power distribution panels are equipped with the described circuit breakers (M series) from Carling Tech.
These magnetic-hydraulic circuit breakers are characterized by extremely accurate triggering behavior, regardless of the ambient temperature. In addition, the circuit breaker fulfill both the function of a fuse, but are also on / off switch. The control panels are equipped with 3, 5, 8 and 10 amp machines as standard. Different assembly possible with no extra charge. The SEATEC switchboards are stackable. Existing systems can thus be easily extended. Operating voltage 12-14 volts. Support plate of 2.5 mm aluminum, with black PU coating. All panels are enclosed with a chart of stickers for labeling the circuits
more Information
SKV 7 / 7S Switchboard Product image
EATEC - Electrical Distribution SKV 14 Product image
Switch Panel "SKV-6" Product image
Switch Panel SKV-6S Product image
Switch Panel SKV-9 Product image
Switchboard Type SKV-21 Product image
Switchboard Type HL Product image
Switchboard Type SKV-15PSS Product image
Switchboard Type SKV-17 VA Product image
SKV-16 PSM Switchboard Product image
Switchboard Type SKV-VA Product image
SKV-1 PSS Switchboard Product image
SKV-2 PSM Switchboard Product image
Spare Labels for Switchboards Product image
VHF Main Switchboard Product image

Phillippi - Electrical Panels

power distribution panel STV204 Product image
power distribution panel STV208 Product image
power distribution panel STV207 Product image
Switchboard STV 308/4 Product image
STV Series Switchboards Product image
Labels for 100 Series Switchboards Product image
Labels for 200 Series Switchboards Product image

Other Electrical Panels

Switch Panel with 6 Circuit Breakers Product image
Switch Panel with Horn Button and Voltmeter Product image
Switches panel with cigarette lighter socket and voltmeter Product image
Weatherproof Fuse Panels with ATO fuse Product image
WeatherDeck weatherproof control panels Product image

Switches

CONTURA V Switch Panel Product image
CARLINGTECH
3.95 EUR In stock from €3.95
Removal tool for rocker switches Product image
Rocker Switch Product image
CARLINGTECH
3.70 EUR In stock only €3.70
Toggle Switch / Button Product image
Pushbutton / Pull Switch, chrome-plated Product image
CARLING SWITCH - Sealed Rocker Switches Product image
CONTURA II Switch Panels Product image
CARLING SWITCH - Rocker Switch Modular Brackets Product image
LED - Control Lamp Product image
Indicator Lamps Product image
CARLINGSWITCH - Electronic Dimmer Product image
DC-Dimmer - 24 V Product image
Integro Rocker Touch Switch Product image
INTEGRO FLOW Dimmer Product image
FRILIGHT smart dimmer switch Product image
IINTEGRO FLOW Rocker Switch Product image
INTEGRO FLOW USB / Cigarette Lighter Socket Product image
INTEGRO FLOW Surface Mounting Case Product image
INTEGRO FLOW Socket Outlet Product image
INTEGRO FLOW Surface Mounting Spacer Ring Product image
INTEGRO FLOW Frames with Hinged Lid Product image
INTEGRO FLOW Panel Jack with Contact Protection Product image
Foot switch, black Product image
Foot Switch / stainless steel Product image

Fuses

Warning: Risk of fire! Basically every consumer - even the smallest - should be protected. Even small consumers, with a current consumption of only a few milliamps, can be the reason for short circuits and cables catching fire after power is supplied to them. In case of bad cable management in the vicinity of flammable materials, even a thin cable (for example 2 x 0.5 mm²) can cause a huge fire hazard after a short circuit.
A breakdown of the consumer in several circuits and a corresponding hedging is useful and makes sense in any case. If a consumer / circuit shuts off due to a short circuit or similar, you are not completely "in the dark" and board operations can still be maintained.
Make sure when installing the fuses are easily accessible - it makes no sense to install a flying fuse to a power supply and then hide it behind the wall or ceiling.
 
Circuit breakers versus fuses - both are good and useful. High current cables, such as windlasses and bow thrusters can be well equipped with fuses. For smaller consumers, circuit breakers are better. Ultimately it is a question of the money and the price, for deciding which type you choose. When using fuses, a number of spare fuses on board should always be available and ready to use in any case.
more Information
Battery Terminal-Fuse Holder and Fuse Product image
Illuminated Blade Fuses Product image
CARLINGSWITCH - High-Load Circuit Breakers Product image
Power line with protection switch Product image
N H - Fuse Clip Product image
Blade Fuse Block Product image
BLUE SEA SYSTEMS
51.95 EUR In stock from €51.95
Terminal Block Jumper for D6 Fuse Box, 5-pc set Product image
Fuse Holder for MIDI Product image
BLUE SEA SYSTEMS
35.95 EUR In stock only €35.95
High Load Fuse Box SafetyHub Product image
Carling Technologies CLB Circuit Breakers Product image
MIDI-Fuses Product image
BLUE SEA SYSTEMS
7.95 EUR In stock from €7.95
CARLINGSWITCH - Circuit Breakers Product image
CARLING SWITCH - Circuit Breaker with LED Product image
Heavy Duty Fuse Holder Product image
ATO In-Line Fuse Holder Product image

Electrical Switches & Fuses

Warning: Risk of fire! Basically every consumer - even the smallest - should be protected. Even small consumers, with a current consumption of only a few milliamps, can be the reason for short circuits and cables catching fire after power is supplied to them. In case of bad cable management in the vicinity of flammable materials, even a thin cable (for example 2 x 0.5 mm²) can cause a huge fire hazard after a short circuit.
A breakdown of the consumer in several circuits and a corresponding hedging is useful and makes sense in any case. If a consumer / circuit shuts off due to a short circuit or similar, you are not completely "in the dark" and board operations can still be maintained.
Make sure when installing the fuses are easily accessible - it makes no sense to install a flying fuse to a power supply and then hide it behind the wall or ceiling.
 
Circuit breakers versus fuses - both are good and useful. High current cables, such as windlasses and bow thrusters can be well equipped with fuses. For smaller consumers, circuit breakers are better. Ultimately it is a question of the money and the price, for deciding which type you choose. When using fuses, a number of spare fuses on board should always be available and ready to use in any case.

SVB uses Cookies to guarantee you your purchase as simple as possible. Within further usage of our pages, you will accept that we use cookies. Learn more...  Ok