CARLINGTECH CARLINGSWITCH - Electronic Dimmer
Product details
This dimmer is a perfect addition to the well-known series of CONTURA switches. The dimmer provides a switching capacity of 10 amps at 12 volts. It is well suited for instrument or interiour lighting. Operation: 200 Hz Pulse Width Modulation (PWM), therefore also ideal for dimming LEDs. Cut-out size: 22 x 44 mm, depth: approx. 60 mm.
Note
- Dimming range 10 - 100%.
Meaning the dimmer does not completely regulate the lighting. A residual brightness (orientation light) remains. - Assembly
The dimmer does not fit the installation frame of the CARLING CONTURA switch series.
The required cutout size is 22 x 44 mm (0.87" x 1.73").
Suitable for panel thicknesses of 0.8 - 4 mm (0.03"- 1.56").
External dimensions of the dimmer on the panel: approx. 50 x 25 mm (2 x 1"). - Contact assignment
- 1 = PLUS 12 volts
- 2 = Output PLUS dimmed
- 3 = MINUS
If you are unable to find them, place the dimmer flat on the table so that the connections point toward you and the side vent opens upwards.
This results in the pin order 1 to 3 from left to right.
(The lamp to be dimmed is connected to pins 2 and 3.)
Documents
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .