SENTILAK Bilge Paint
This product is no longer available.
SVB recommends the following for this item
Product details
SENTILAK is ideally suited for use in bilges, storage spaces and bulkheads. The paint is resistant to penetrating moisture, oil, fuels and cleaning agents. Yield: 10 m²/litre. Thinner No. 703. Contents: 750 ml
Processing instructions:
For coated surfaces: Sand the surface, clean and allow to dry. Then apply a primer.
For uncoated surfaces:
Drying time at 15 °C: 24 hours
Processing time at 15 °C: min. 48 hours
Processing temperature: +10 °C to max. 35 °C
Processing instructions:
For coated surfaces: Sand the surface, clean and allow to dry. Then apply a primer.
For uncoated surfaces:
- GRP: Wash with a detergent and rinse with fresh water and allow to dry. Abrade with 180280 grade (grit) paper and remove dust residues afterwards.
- Wood: Sand with 80-120 grit paper and remove dust. Then apply 2 coats of Defender or Giano (diluted) and sand with 180-220 grit. Then rinse and leave to dry.
- Steel: Pressure wash with fresh water and degrease with Super Cleaner if necessary. Then gritblast to Sa 2½ near white metal surface. Clean and dry well, then apply 2 coats of Defender or Giano (thinned).
- Aluminium: Pressure wash with fresh water and degrease with Super Cleaner if necessary. Sand the surface with 36-40 grit and remove dust residues. Then apply 1 coat of Defender.
- Old gelcoats: Sand with 180-220 grit and remove dust residues.
Drying time at 15 °C: 24 hours
Processing time at 15 °C: min. 48 hours
Processing temperature: +10 °C to max. 35 °C
Documents
Datasheet
PDF, 754,21 KB
Safety datasheet
PDF, 138,94 KB
Datasheet
PDF, 649,17 KB
Safety datasheet
PDF, 142,11 KB
Datasheet
PDF, 754,92 KB
Safety datasheet
PDF, 141,05 KB
Safety datasheet
PDF, 142,95 KB
Safety datasheet
PDF, 142,04 KB
Accessories
-29%
INTERNATIONAL
SUPER CLEANER
€14.24
only
€10
04
> 100
-40%
BOERO
GIANO 1-Component Epoxy Primer
€34.94
only
€20
97
9
3M
Painter's Tape 25 mm x 50 m
only
€11
72
> 100
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Varnishing Flat Brushes
from
€3
28
3 variants
PU Foam Radiator Roller
only
€0
67
> 100
Customers also bought
Gasket-Clew with Hook
from
€2
27
2 variants
Rubber Shaft Bearings
from
€35
25
5 variants
HEMPEL
MILLE NCT Self-Polishing Antifouling
from
€32
73
12 variants
GLEISTEIN
DOCK-FLEX - Mooring Line / anthracite / red
from
€2
48
5 variants
-26%
SEATEC
STANDARD PRO Self-Polishing Antifouling
€28.53
from
€20
97
8 variants
-50%
INTERNATIONAL
MICRON 300 Self-Polishing Antifouling
€279.23
only
€138
61
14
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!