SVB recommends the following for these items
Thinner 698. Yield: 10 m²/l.
For coated surfaces:
Remove growth from the substrate and carefully degrease. Sand the surface thoroughly, with 320/400 grain paper, clean well and allow to dry. Remove rust and dust before application. Then apply Futura.
For uncoated surfaces:
Remove growth from the substrate and carefully degrease. Then use Undercoat PRO on the surface.
After Undercoat PRO has dried, sand the surface thoroughly with 320/400 grit, clean well and allow to dry. Remove rust and dust before application. Then apply Futura.
Drying time at 15° C: 8 hours
Processing time at 15° C: min. 24 hours
Processing temperature: +15° C to max. 30° C
Please note the following hazard warnings:
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .