BOERO ALTURA 619 PLUS Hard Antifouling
Article Number
41413
EAN
8010589848780
Model no.
70P61900100000750
Description
BOERO - ALTURA 619 PLUS hard antifouling
Antifouling type
Hard antifouling
Colour
White
Contents
750
ml
Area of application
Salt water, Fresh water, Brackish water / Mixed operation
Hull material
GRP, Wood, Steel
Method of application
Roller, Brush, Spray gun
No. of coats (recommended)
2 - 3
Yield (theoretical)
9
m²
Immersion after
18
h @ 15 °C
Max. time before immersion
3 months
Biocide-free
No
For the Netherlands
No
Boat type
Sailboat, Motorboat
Existing coating
SEATEC Sprint Pro, INTERNATIONAL Ultra 300, HEMPEL Hard Racing TecCel, HEMPEL Ecopower Racing, BOERO Altura 619 Plus, BOERO Scirocco 622, AWN Hart Antifouling
BAuA-No.
Not specified
SVB recommends the following for this item
Product details
The high-performance ALTURA 619 PLUS hard antifouling is especially suitable for use in waters where intense fouling can occur, thanks to its increased copper content. Effectively protects your wood, steel or GRP hull from organisms such as slime, algae and organic growth. For professional and general use. Yield: 12 m²/l.
Processing instructions
Technical specifications
For coated surfaces:
GRP: Degrease the surface to be treated with a thinner (e.g. Thinner 703) or a suitable cleaning agent. Sand the area to be treated with 180-220 grit sandpaper. The surface must be clean and free of grease. Prime with MISTRAL FONDO. Then apply two coats of ALTURA 619 PLUS. Repaint every season.
Wood: Sand the area to be treated with P80 - P120 grit sandpaper. The surface must be clean and free of grease. Prime with MISTRAL FONDO. Then apply two coats of ALTURA 619 PLUS. Repaint every season.
Steel: Rinse with water and remove all traces of oil and grease (e.g. with Thinner 703). Use a sandblaster if required. Surface must be clean and grease free. Prime the treated metal with MISTRAL FONDO. Then apply two coats of ALTURA 619 PLUS. Repaint every season.
Not to be used in combination with PTFE-containing antifoulings.
Processing instructions
Technical specifications
- Processing temperature: +10° C to +30° C
- Drying time at 15 °C: 18 hours
- Overcoating time at 15 °C: min. 12 hours
For coated surfaces:
- In good condition: Remove fouling and impurities using a high-pressure cleaner. Sand the area to be treated with 80-120 grit sandpaper. If old antifouling is unknown or of a different type, apply barrier coat. Use MISTRAL FONDO primer for this.
- In poor condition: Remove impurities such as fouling and loose material using a high-pressure cleaner. Lightly sandblast (being careful not to damage the paint under the old antifouling) or sand the area to be treated with 80-120 grit sandpaper. Follow with a coat of DEFENDER or MISTRAL FONDO as a primer before beginning to apply antifoul.
GRP: Degrease the surface to be treated with a thinner (e.g. Thinner 703) or a suitable cleaning agent. Sand the area to be treated with 180-220 grit sandpaper. The surface must be clean and free of grease. Prime with MISTRAL FONDO. Then apply two coats of ALTURA 619 PLUS. Repaint every season.
Wood: Sand the area to be treated with P80 - P120 grit sandpaper. The surface must be clean and free of grease. Prime with MISTRAL FONDO. Then apply two coats of ALTURA 619 PLUS. Repaint every season.
Steel: Rinse with water and remove all traces of oil and grease (e.g. with Thinner 703). Use a sandblaster if required. Surface must be clean and grease free. Prime the treated metal with MISTRAL FONDO. Then apply two coats of ALTURA 619 PLUS. Repaint every season.
Not to be used in combination with PTFE-containing antifoulings.
These antifoulings / paints may not be delivered by us to Switzerland, the Netherlands and Belgium.
Use biocidal products with care. Always read the label and product information prior to use.
Sale to end consumers only and in conventional quantities.
Product safety
Please note the following hazard warnings:
Hazard pictograms
Signal word
Warning
Hazard warnings
Flammable liquid and vapour.
Causes serious eye irritation.
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Use only outdoors or in a well-ventilated area.
In case of fire: Use … for extinction.
Dispose of contents/container to …
Causes serious eye irritation.
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Use only outdoors or in a well-ventilated area.
In case of fire: Use … for extinction.
Dispose of contents/container to …
H226, H319, H335, H410, P101, P102, P103, P210, P271, P370+P378, P501
Documents
Datasheet
PDF, 744,66 KB
Safety datasheet
PDF, 113,96 KB
Item no.: 41410,41413
Item no.: 41410,41413
Safety datasheet
PDF, 123,61 KB
Item no.: 41411,41414
Item no.: 41411,41414
Safety datasheet
PDF, 123,23 KB
Item no.: 41412,41415
Item no.: 41412,41415
Datasheet
PDF, 585,44 KB
Safety datasheet
PDF, 116,92 KB
Safety datasheet
PDF, 125,67 KB
Safety datasheet
PDF, 125,75 KB
Datasheet
PDF, 749,22 KB
Safety datasheet
PDF, 124,91 KB
Safety datasheet
PDF, 126,01 KB
Safety datasheet
PDF, 116,40 KB
Safety datasheet
PDF, 117,07 KB
Safety datasheet
PDF, 126,00 KB
Safety datasheet
PDF, 127,15 KB
Accessories
-44%
BOERO
MISTRAL FONDO Primer
€34.32
from
€19
29
2 variants
YACHTCARE
Dust Cloth
only
€3
78
> 100
3M
Premium Respirator Mask
only
€7
52
98
3M
Safety Goggles
only
€11
72
51
3M
Protective Overall
from
€13
40
4 variants
3M
Masking Tape TOP TAPE 18 mm or 24 mm x 50 m
from
€2
48
2 variants
Antifouling Flat Brush
from
€2
10
3 variants
Paint Set / Roller, Handle and Tray
only
€2
61
> 100
by DIDIER C.
5/16/2023
Verified purchase
5/16/2023
Verified purchase
Customers also bought
Similar items
NEW
INTERNATIONAL
TRILUX 200 Hard Antifouling
€63.00
from
€58
78
6 variants
NEW
SEAJET
COASTAL 037 Hard Antifouling
€32.73
from
€26
01
10 variants
-56%
BOERO
SCIROCCO 622 PLUS Hard Antifouling
€85.75
from
€37
77
5 variants
HEMPEL
ECOPOWER RACING Hard Antifouling
only
€70
55
1
-26%
SEATEC
SPRINT PRO Hard Antifouling
€38.61
from
€28
53
8 variants
-17%
SEATEC
GTI 30 Thin-Film Antifouling / graphite
€40.29
from
€33
57
2 variants
-42%
INTERNATIONAL
ULTRA 300 Hard Antifouling
€82.94
from
€47
86
14 variants
HEMPEL
HARD RACING Antifouling with TecCel
from
€32
73
10 variants
-50%
INTERNATIONAL
VC OFFSHORE EU Hard Antifouling
€96.56
from
€47
86
7 variants
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
- More "Customers ask customers" available in the following languages :
-
No questions asked yet. Be the first to ask a question!
