BLUE SEA Water/Wastewater and Diesel Tank Sensor for VSM 422
Item no.
60574
EAN
00632085018108
Model no.
1810
Description
VSM 422 Tank Sensor for Water/Wastewater and Diesel
Product details
Ultrasonic water/wastewater and diesel tank sensor. Can only be used in conjunction with the BLUE SEA System Monitor VSM 422.
- Power supply: 10-32 volts
- Power consumption: approx. 28 mA (12 V)
- Elec. connection 3-core cable, can be extended as desired
- purple = POS electrical system (5 A fuse required)
- black = NEG wiring system
- pink = transducer output for display
- Maximum tank depth 810 mm
- Minimum distance to other tank installations: approx. 80 mm
- Temperature range: -40 to + 85°C
- Easy mounting on SAE5 tank flange
- Fastening torque: max. 1.7 Nm (15 in-lbs)
- Measurement accuracy: +/- 3.8 mm (0.125")
- Not identifiable measuring range* (dead range at PN1810) between bottom of transducer and liquid: 50.8 mm (2.00")
* Note
The tank sensor VSM422 is equipped with a tube on the bottom. This prevents potential adhesions to the bottom of the transducer, for example when used in grey water and sewage tanks.
When filling the tank, an air pocket is created inside this tube, which results in a "dead zone" of about 5 cm (2") between the tank top and the liquid's surface during measurement.
Completely filling the tank may result in a measurement error.
Our tip when completely filling the tank with fresh water or diesel: The dead zone is eliminated by drilling a small hole in the pipe near the bottom of the sensor or by removing the pipe.
Completely filling the tank may result in a measurement error.
Our tip when completely filling the tank with fresh water or diesel: The dead zone is eliminated by drilling a small hole in the pipe near the bottom of the sensor or by removing the pipe.
This product change results in a loss of warranty.
Customers also bought
Stainless Steel Hose Clamps
from
€1
76
18 variants
-5%
Heavy-Duty Stainless Steel Hose Clamps
€4.88
from
€4
62
24 variants
-41%
INTERNATIONAL
INTERDECK Non-Slip Topcoat
€45.42
from
€26
85
5 variants
TRUDESIGN
Ball Valves
from
€41
97
7 variants
Navigation Starter Set
only
€29
37
37
SHELF Reading Light / LED
only
€45
34
35
STS High-Load Fuse / 10 to 355 A / M10
from
€5
84
14 variants
-10%
SPRENGER
S Block with Swivel and Bottom Bracket / 8 mm / plain bearing
€33.74
only
€30
21
2
BLUE SEA
ANL Fuse Holder AK2
only
€29
37
54
BLUE SEA
Bus Bar 2x M6 / 20x M4
only
€29
37
13
Similar items
VICTRON
VE.Bus Cable
from
€16
76
3 variants
VDO
VERATRON Push Button for VL Flex IBM Display
only
€25
17
4
VDO
VERATRON Intelligent Battery Sensor IBS / 24V / 255A / NMEA2000
only
€323
49
VDO
VERATRON Intelligent Battery Sensor IBS / 12V / 500A / NMEA2000
only
€239
45
1
VDO
VERATRON Intelligent Battery Sensor IBS / 12V / 250A / NMEA2000
only
€214
24
1
MASTERVOLT
Plug for MLI Ultra Lithium Ion Battery / waterproof
only
€10
88
2
-14%
SIMARINE
Tilt Sensor / Inclinometer
€88.15
only
€75
59
4
-6%
VICTRON
Temperature Sensor
€33.00
only
€31
05
21
-5%
VICTRON
VE.Direct-Cable
€15.00
from
€14
24
5 variants
-7%
VICTRON
VE.Can to NMEA2000 Micro-C Adapter Cable
€75.00
only
€69
71
12
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
No questions asked yet. Be the first to ask a question!