suitable as a second sensor or as a spare for the BEPMARINE gas detectors 600-GD / 600-GDL / FD-2.
- Case dimensions Ø x H: 42 x 21 mm
- Connection cable Ø x L: 3.5 mm x 5 m, wire colors red / green / black
- Distance between mounting screws: 37 mm
- 2 Phillips self-tapping screws 1.9 x 13 mm included
- Cable length: 5 m
The sensor must be mounted in an area that is protected from (bilge or splash) water.
If the gas sensor gets wet, it is no longer safe / ready for operation and must be replaced!
If you want to use the sensor as a spare, you must pay attention to the serial number of your 600-GD / 600-GDL / FD-2 gas detector!
For devices with an S/N smaller than J48494, an 82 kOhm resistor must be mounted on the back of the device between the sensor connections "G" and "R".
Customers also bought
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone on: +49 (0)421 57290510 .