BAVARIA Gas Pressure Spring for Cruiser 32/37 Swimming Platform
Article Number
22815
Model no.
314948_BH
Description
Gas Pressure Spring for Cruiser 32 Swimming Platform
Type
1900 N
Material
Stainless steel V4A
For Bavaria
Cruiser 32, Cruiser 37
Bavaria Part-No.
314948
Product details
gas pressure spring 1900 N for your BAVARIA yacht. The gas pressure spring aids with opening and closing of your Cruiser 32/37 swimming platform. The gas pressure spring is made of stainless steel.
Customers also bought
BAVARIA
Door for Gas Box
only
€47
02
BAVARIA
Main Panel 301
only
€1.159
62
4
BAVARIA
Stanchion for Cruiser
only
€25
17
BAVARIA
PVC Skirting Board
from
€210
04
2 variants
BAVARIA
Bent Board Lock
only
€75
59
BAVARIA
Hinge / folding
only
€3
53
BAVARIA
Lock for Access Door DIN Right
only
€53
74
BAVARIA
Lock for Access Door DIN Left
only
€53
74
BAVARIA
Stanchion Base for Rail Track / from 2001
only
€75
59
Similar items
BAVARIA
Linear Actuator for Bathing Platform
only
€2.016
76
1
BAVARIA
Hinges for Bathing Platforms
from
€579
79
2 variants
BAVARIA
Eccentric Guy for Bathing Platform
only
€15
92
5
BAVARIA
Guy for SC31 bathing platform
only
€49
54
4
BAVARIA
Hinge Bathing Platform Cruiser 46/51
only
€579
79
BAVARIA
Balancing Buffer for Bathing Platform
only
€7
82
BAVARIA
Proximity Switch for Bathing Platform / Inductive
only
€75
59
BAVARIA
Cable winch for bathing platform TFL
only
€1.131
89
5
BAVARIA
Motor Hood and Platform Control Unit
only
€336
09
1
BAVARIA
Control of Linear Actuator for Bathing Platform
only
€794
08
2
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Keith G.
asked
on Aug 30, 2018
It is not clear if this is an extending spring or a retracting spring. Will the natural position of the spring be short or long? In other words, will it help with pulling or with pushing the platform?
Answer:
Dear Keith, the natural position of the spring is long. So the Pressure is relieve.
Your SVB-team.
Question:
Paul P.
asked
on Jul 19, 2019
I can see on your website that htere is a gas pressure spring for a Bavaria32 bathing platform. I have a Bavaria40 - is this the same spring?
Answers:
Dear Paul, we are not sure, but we will check this for you. Please send us your Hull Identification Number to our: Bavaria@SVB.de // Then you will get a short offer. Your SVB-team.
Each spring has "power rating" - 1900N in this case, which is proper size for Cruiser 32. Check yours - it should be marked somehow on the original one. As the platform weight is different for each model - the spring can be different too.
Question:
Martin B.
asked
on Oct 8, 2019
Item Ref: 22815
Gas Pressure Spring.
Is this the correct spring for a Bavaria 36 2011 model?
If it is not can you give me details of the correct spring and the price.
Is there a replacement teak mit for ths Bavari 36 Swimming platform.
Thank you.
Martin Brooks
Answer:
Each spring has "power rating" - 1900N in this case, which is proper size for Cruiser 32. Check yours - it should be marked somehow on the original one. As the platform weight is different for each model - the spring can be different too.
Question:
Sedat A.
asked
on Jan 9, 2020
Hello I gave Cruiser40 made 2011. My swimming platform no longer functions properly. Is item no 22815 correct? Do ı need anything else?
Answers:
Each spring has "power rating" - 1900N in this case, which is proper size for Cruiser 32. Check yours - it should be marked somehow on the original one. As the platform weight is different for each model - the spring can be different too.
Thank you. Do you know/have the proper size for C40? How can I check since nothing is disassembled yet? Is it possible?
I don't know, but it should be marked on the spring. You can also try to ask Bavaria. Otherwise you need a whole hinge, which is more expensive. Anyway - please note that replacing just a spring is a really tricky job, sometimes it may be impossible if the original hinge is bent. It took me half day in C32 to get it done, including cutting the old spring into parts, as it was impossible to dismantle otherwise. With whole hinge it would be way easier & faster.
Sounds like it could be even more difficult or may be impossible to do it on the water.
Anyhow thanks for your reply I will check with Bav and get back to you. If needed.
I had done it on the water. You just need to be stern-to, and - to be comfortable - two extra people (and some kind of lifting system - you can use halyard for this) to hold and secure, and flip swimming platform once you unscrew it.
Answer:
Dear customer, please email: bavaria@svb.de in this case.
Question:
Gilbert A.
asked
on Aug 4, 2021
Is this the same spring used on a Bavaria 41 Cruiser - from 2013?
Answer:
Dear customer, please email: bavaria@svb.de in this case.
Question:
Etienne F.
asked
on Jan 18, 2022
Hi can I buy the Gas Pressure Spring for 41 Cruiser Swimming Platform - hull number DE-BAVJ41A0J314 and in which case can you please quote the correct part number. I found item #22815# on your website but it states it's for Bavaria Cruiser 32. In case the gas strut is not available can you please confirm the part number for the complete hinge assembly port & starboard? Could it be the #314920# and #314919# ?
Answer:
Dear customer, please email: bavaria@svb.de for an offer. Thanks.
Question:
Sam C.
asked
on Apr 21, 2022
Does anyone know of an instruction video or information source on exactly how to take out the old gas pressure spring and replace with the new? It seems quite difficult without any prior knowledge on the technique. We have a 2015 Bavaria 33. Many thanks
Answers:
I received the following advice by email from Bavaria:
"To change the gas springs, the hull and bathing platform hinges are removed.
Then the hinge is clamped in a vise so that the pin that holds the gas spring in the hinge can be removed and reinserted later."
I am going to attempt this myself and will try to make a video as I go.
Hi David. How did it go with the replacement? I,m receiving my new springs tomorrow and I'm very interested in any tips regarding the operation :)
Hi Roger. I haven't attempted the replacement as yet as I need to devise a method of suspending the swim platform while removing the hinges. I considered using the dinghy davit, but even so, I am concerned about doing this over the water and might only attempt this project when we next haul out in August/September.
Okay, thank you for the answer.
I'm pondering this right now and started thinking that lowering the platform onto my inflatable dinghy and let it rest there might be the easiest way to be able to get the job done. I'll also check my local marina tomorrow, maybe the've done it before.
Have a nice summer.
I've finally completed the gas spring replacement and documented the process here: https://bavariayacht.org/forum/index.php/topic,3921.0.html
Question:
John D.
asked
on May 26, 2022
I have Bavaria cruiser 32 from - 08, The ssimminc plattform is operated with two lifters (motors). I like to change to a gas pressure spring. Can i use this one?
Answer:
I was supposed to write Bavaria cruiser 31
Question:
OSWALDO A.
asked
on May 29, 2022
Do you have this gas spring pressure for Bavária cruiser 45. 2012?
Answer:
Please send your inquiry with your hull # to bavaria@svb.de
Question:
Erhan U.
asked
on Mar 19, 2023
hi there,i own bavaria cruiser 46, 2016 make. gas pressure springs do not work properly. what iten no or model no should i order?
thank you
Answers:
Hello Erhan, please send us your Hull number via our: Bavaria@SVB.de so we will send you a offer with the right spare part. Yours SVB-team.
Thank you very much, i will contact