V50 DSC VHF Radio / with integrated AIS Receiver
But a successive product is available:
SVB recommends the following for this item
Product details
B&G V50 VHF Radio
with integrated AIS receiver and DSC controller
Communicate clearly with the reliable B&G V50 VHF radio. The internal AIS receiver can output the incoming AIS data to a wide variety of devices using the integrated NMEA0183 or NMEA2000 interface.
Dual-channel VHF
The V50 VHF radio for dual-channel communication with AIS reception and VHF via a single antenna. The unique "TrackYourBuddy" function shows the position of up to three buddies. Use AIS with B&G Zeus chartplotters for a fully integrated navigation and security system.
Whether it's a handheld system for using a thumb to "push to talk" or a built-in VHF system with dedicated channel buttons, the menus are always easy-to-use and intuitive. All B&G VHF maritime radio systems have an emergency switch for situations at sea when distress calls need to be made. Thanks to Digital Selective Calling, every B&G system can send an automatic distress signal.
Main functions
- Firmly mounted DSC VHF
- Built-in AIS receiver
- NMEA0183 input (4,800 baud for GPS data RMC, GGA, GLL, GNS)
- NMEA0183 output (38,400 baud for DSC and AIS data sets)
- Powerful internal speaker / PA
- External speaker connection (power: 2W for 4 Ohm speakers / 4W for 2 Ohm speakers)
- Dual and TriWatch modes
- MOB
- TrackYourBuddy function
- AIS plot, waypoints, navigation and MOB
- Waterproof according to IPX7
- Can be immediately integrated into marine network
- 6 buttons for easy rudder operation
- Mounting kit & sun cover included as standard
- Added value with built-in AIS receiver - one antenna required
- User-friendly - large display with plenty of information, tested rotary switches
Note - Error in installation instructions on page 17
Technical specifications
Frequency range: send | 156.025 to 157.425 MHz |
Frequency range: receive | 156.025 to 163.275 MHz |
Operating temperature | -20 ° C to +55 ° C |
Operating voltage | 12V DC on-board voltage |
Power consumption when receiving | Max. <1.5A (max.3.5A with hailer function) |
Power consumption when sending | <6A at high transmission power (at 13.6V voltage) / <1.5A at low transmission power (at 13.6V voltage) |
NMEA0183 interface (input) | 4,800 baud for GPS data sets RMC, GGA, GLL, GNS |
NMEA0183 interface (output) | 38,400 baud for DSC and AIS datasets |
NMEA2000 interface | Micro-C (5-pin connector) |
Output power for external hailer | 30W at 4 ohms |
Digital Selective Calling (DSC): Receiving | Class D |
AIS receiver | Integrated, 2 channels |
Dimensions | 180.5 x 96.3 x 171.0 mm |
Weight | 1.63 kg |
LCD display | 128 x 256 pixels / 1.3 x 2.6 " |
Note
The DSC or ATIS function / menu is only available in the respective channel group. Please change to the corresponding channel group to use the respective functions.
Programming notes
This device has to be programmed with your personal data, such as: MMSI and/or ATIS numbers.You can program the MMSI and ATIS number yourself. The corresponding procedure can be found in the manual.
Alternatively, we can programme the device for you. For this we charge a programming fee.
If we would like us to programme the device, please enter your MMSI / ATIS number in the 'comment' field while ordering or fill out our datasheet for programming VHF radios and send it to: datenblatt@svb.de.
If additional channels (e.g. Dutch channels 30, 31 and 37) are to be activated, we calculate our programming fee . The flat rate is only charged once per device.
The application for MMSI and ATIS numbers can be found under Service/Downloads.
Documents
Accessories
See subsequent models of this product
Customers also bought
Similar items
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .