AUTOTERM COMFORT CONTROL / for air heaters
Item no.
42949
Description
AUTOTERM AIR - Control unit for air heaters
Product details
The new Comfort Control display panel boasts a modern design and numerous functions, such as four different heating modes, three adjustable timers and a fan function. Designed for use with Autoterm's 2D and 4D diesel hot air heaters.
Design and operation
The control unit has a modern design and features a rotary knob with intuitive menu navigation. But that's not all. Two further buttons complete the unit - a back button to return to the previous screen and a quick button to start or stop the heater without calling up the menu.
Four different adjustable heating modes
Four different heating modes can be operated via the control unit. These include thermostat mode, power mode, temperature mode and heating and ventilation.
The intelligent thermostat function automatically switches the heating on when the temperature falls below a set number and similarly turns it off once a set temperature is reached. In this case, the unit heats until 1 °C over the pre-selected temperature. Combustion then switches off and the heater runs in ventilation mode until the temperature has dropped 5 degrees below the preset temperature. The heating process then automatically resumes. Exact heating power is additionally set via the power mode and the temperature mode maintains the set temperature range.
Fan function
When the device is operated in fan mode, air circulation in the room can be significantly improved. This prevents the build-up of heat and the formation of mould.
Voltage monitoring
This screen allows monitoring of voltage at all times so as to avoid battery discharge. A voltage limit can be set up. After the voltage limit has been reached, the heating automatically switches off.
Freeburn reminder
An auxiliary heating system will always need to be "freewheeled", i.e. burnt free from time to time so that the combustion chamber does not become sooty and affect performance. So that this doesn't happen, the unit reminds you at regular intervals that the heating needs to be unblocked.
Timer function
Thanks to the unit's timer function, you can determine in advance when and in which operating mode the heater should work. Choose between "every day", "every week day" or "set day".
Further features at a glance:
NOTE
The Comfort Control control panel works with almost every Autoterm Air heater. However, there may be exceptions. This may be the case with older Planar 44D or 4D heaters without fans. There is generally no issue in using the control unit from the 2017 model year onwards (type 4D).
2 kW heaters (type 2D) will work with the new control panel for all years of manufacture.
Design and operation
The control unit has a modern design and features a rotary knob with intuitive menu navigation. But that's not all. Two further buttons complete the unit - a back button to return to the previous screen and a quick button to start or stop the heater without calling up the menu.
Four different adjustable heating modes
Four different heating modes can be operated via the control unit. These include thermostat mode, power mode, temperature mode and heating and ventilation.
The intelligent thermostat function automatically switches the heating on when the temperature falls below a set number and similarly turns it off once a set temperature is reached. In this case, the unit heats until 1 °C over the pre-selected temperature. Combustion then switches off and the heater runs in ventilation mode until the temperature has dropped 5 degrees below the preset temperature. The heating process then automatically resumes. Exact heating power is additionally set via the power mode and the temperature mode maintains the set temperature range.
Fan function
When the device is operated in fan mode, air circulation in the room can be significantly improved. This prevents the build-up of heat and the formation of mould.
Voltage monitoring
This screen allows monitoring of voltage at all times so as to avoid battery discharge. A voltage limit can be set up. After the voltage limit has been reached, the heating automatically switches off.
Freeburn reminder
An auxiliary heating system will always need to be "freewheeled", i.e. burnt free from time to time so that the combustion chamber does not become sooty and affect performance. So that this doesn't happen, the unit reminds you at regular intervals that the heating needs to be unblocked.
Timer function
Thanks to the unit's timer function, you can determine in advance when and in which operating mode the heater should work. Choose between "every day", "every week day" or "set day".
Further features at a glance:
- Time display
- Improved temperature sensor
- Optimised error display
- Mount with screws or double-sided adhesive tape
- Plug & Play connection
- Languages: German, English, Russian
- Dimensions: 82 x 37 x 19 mm
- Cable length: Approx. 300 mm
NOTE
The Comfort Control control panel works with almost every Autoterm Air heater. However, there may be exceptions. This may be the case with older Planar 44D or 4D heaters without fans. There is generally no issue in using the control unit from the 2017 model year onwards (type 4D).
2 kW heaters (type 2D) will work with the new control panel for all years of manufacture.
Customers also bought
RWO
MIGHTYSTICK Tiller Extension
from
€205
84
2 variants
GEDORE
Toolbox TOURING, 47 pcs
only
€403
32
5
Wide-Neck Canister
from
€33
57
2 variants
-6%
MARINCO
High-Power Plug and Receptacle / 70 A / 3-pole
€71.25
only
€67
18
-8%
MARINCO
High-Power Connector / 70 A / 3-pole
€35.55
only
€32
73
3
-9%
MARINCO
High-Power Socket / 70 A / 3-pole
€41.60
only
€37
77
4
RM
SEALOCK Toilet Base, Complete
only
€37
77
5
DOMETIC
Thermostat Service Kit for VD Evaporators
only
€54
58
14
Universal Protective Cover for Flush USB Sockets
only
€2
48
36
-11%
Ceramic Fan Heater / 230 V / 1.5 kW / dark grey
€56.30
only
€50
38
> 100
Similar items
WALLAS
Control Panel for 1300 Heater
only
€98
28
2
WALLAS
Heater Exhaust Hose 28 / 45 mm
only
€67
18
31
WALLAS
Heater Exhaust Hose 28 mm
only
€31
05
7
AUTOTERM
Air Silencer 90 mm for Autoterm 4D / Planar 44D Air Heaters
only
€50
38
15
AUTOTERM
Air Silencer 60 mm for Autoterm 2D / Planar 2D Air Heaters
only
€50
38
4
AUTOTERM
Air Intake Hose with Silencer for 2D, 4D, 44D Air Heaters
only
€12
56
4
WEBASTO
Stainless Steel Exhaust Hose / 24 mm
only
€20
97
30
WALLAS
Tank Connection for Diesel Devices
only
€52
06
8
WALLAS
Burner Base Fleece / 85mm
only
€20
97
30
WALLAS
Sensor T4
only
€95
76
2
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Question:
Stefan C.
asked
on Oct 3, 2022
I have a chinesee air heater installed in my boat - can I use a autoterm comfort control on this ?
Answer:
Dear customer, unfortunately we cant say as we do not know which model you have.