4D DELUXE URAL EDITION Diesel Warm Air Heater
Necessary accessories for this item
Product details
The 4D DELUXE URAL EDITION auxilliary diesel air heater from Autoterm Air is perfect for larger boats from 7.5 m. The digital control panel (including temperature sensor) makes it extremely easy to adjust power levels and temperature. The air heater is certified (e2) and can be installed without registration. The hole dimensions are identical to those of the popular Webasto or Erberspächer heaters, so it is easy to replace without having to drill new holes. Delivery includes an altitude kit, an exhaust silencer, an additional tank and all the components needed for installation. A minimum diameter of 90 mm is recommended for connecting hot air pipes. The connection adapter for the warm air side to reduce from 96 mm to the standard dimension of 90 mm is not included in the delivery.
The heater's cable harness features a gate input for connecting your own remote control or other secondary control unit. You can choose whether the connection is made via ON/OFF switch or pulse. The advantage of the latter means that it is possible to operate the heater with different controllers. For example, you can switch on with a remote control or a push-button and later adjust power levels or even switch off from your bed using the included control element.
In addition, the air heater is equipped with a so-called altitude kit. Thanks to this altitude kit, the heater automatically reduces the quantity of fuel injected depending on the ambient air pressure. This prevents or drastically reduces the likelihood of the combustion chamber from clogging with carbon particulate in the event of a falling air oxygen content.
Maintenance is not normally necessary. However, to prolong service life the combustion chamber must be allowed to get really hot from time to time to burn off any residues. As a rule, running the heater at full power for at least half an hour once every week or every two weeks is enough to allow the combustion chamber to reach full temperature again.
Technical data
Included
Note
In order to avoid drilling large holes for the connectors when installing the dosing pump wire harness, a connector housing has not been partially installed on one side. It is included with the delivery and can be found in a small bag.
Polarity need not be observed when installing the contacts in the plug housing.
The heater's cable harness features a gate input for connecting your own remote control or other secondary control unit. You can choose whether the connection is made via ON/OFF switch or pulse. The advantage of the latter means that it is possible to operate the heater with different controllers. For example, you can switch on with a remote control or a push-button and later adjust power levels or even switch off from your bed using the included control element.
In addition, the air heater is equipped with a so-called altitude kit. Thanks to this altitude kit, the heater automatically reduces the quantity of fuel injected depending on the ambient air pressure. This prevents or drastically reduces the likelihood of the combustion chamber from clogging with carbon particulate in the event of a falling air oxygen content.
Maintenance is not normally necessary. However, to prolong service life the combustion chamber must be allowed to get really hot from time to time to burn off any residues. As a rule, running the heater at full power for at least half an hour once every week or every two weeks is enough to allow the combustion chamber to reach full temperature again.
Technical data
Voltage | 12 V |
Power consumption | 10 - 62 W |
Heating capacity | 1 - 4 kW |
Airflow rate | 70 - 120 m³/h |
Fuel consumption | 0.12 - 0.514 l/h |
Air intake | 80 / 83 mm |
Hot air outlet | 96 / 100 mm |
Dimensions | Length: 330 mm + 30 mm intake Height: 265 mm + 30 mm bracket + 45 mm screw cap Depth: 100 mm |
Weight of the heater (without accessories) | 5.5 kg |
Included
- 12 V heater
- Digital control unit PU-27 with OLED display and timer function (cable length 1.8 m)
- PU-27 item weight: 0.30 kg; Dimensions: WxHxD 60 × 50 × 12 mm; only available with Russian or English menu language
- Dosing pump "Thomas Magnet P327"
- Dosing pump rubber holder
- Dosing pump wire harness (cable length 6 m)
- Heater wire harness (cable length 6.5m)
- Intake air hose with integrated silencer
- Heat protection hose
- End piece exhaust pipe + clamp
- Tank intake pipe
- 5.5 m fuel line
- 7.5 l fuel tank plastic + 3x mounting bracket (dimensions see below)
- 300 mm fuel line connector
- 1 m corrugated exhaust pipe metal 24 mm
- Stainless steel exhaust muffler (dimensions 17 x 9 x 5 cm)
- Screws, nuts, brackets, heat shrink tubing, cable ties
- Instruction manual
Note
In order to avoid drilling large holes for the connectors when installing the dosing pump wire harness, a connector housing has not been partially installed on one side. It is included with the delivery and can be found in a small bag.
Polarity need not be observed when installing the contacts in the plug housing.
Documents
Accessories
See subsequent models of this product
Customers also bought
Warm Air Ducts
from
€10
88
6 variants
-6%
WEBASTO
Branch Piece 90/60/90 mm
€8.00
only
€7
52
30
AUTOTERM
Extension Cable for Control Unit / 3 m
only
€15
92
23
AUTOTERM
Mounting Bracket for Heater / 90 degrees
only
€25
17
29
AUTOTERM
Exhaust Through-Hull / 24 mm
from
€59
62
2 variants
AUTOTERM
Adapter for 4D Heater
only
€10
04
51
-61%
AUTOTERM
AUTOTERM AIR - Adapter for 4D Heater / inlet air
€31.90
only
€12
56
26
Similar items
WEBASTO
Air Top Evo Diesel Warm Air Heater 55D / 24 V / 5 kW
only
€2.252
06
2
-27%
WEBASTO
Air Top Evo Diesel Warm Air Heater 55D / 12 V / 5 kW
€2,299.00
only
€1.680
63
3
-9%
WEBASTO
Air Top Evo Diesel Warm Air Heater 40D / 24 V / 3.5 kW
€2,059.00
only
€1.865
50
AUTOTERM
4D URAL EDITION Diesel Warm Air Heater with control unit / 12 V / 4 kW
only
€554
58
20
AUTOTERM
2D URAL EDITION Diesel Warm Air Heater with control unit / 12 V / 2 kW
only
€495
76
10
WALLAS
30 VikingCombi Diesel Warm Air/Water Heater / 12 V / 2.5 kW
only
€2.201
64
1
-25%
WEBASTO
Air Top 2000STC Marine Diesel Warm Air Heater / 12 V / 2 kW
€1,629.00
only
€1.217
65
4
-25%
WEBASTO
Air Top Evo Diesel Warm Air Heater 40D / 12 V / 3.5 kW
€2,039.00
only
€1.529
37
4
WALLAS
Diesel Heater 30 VIKINGAIR / 12 V / 3 kW
only
€1.562
98
1
WALLAS
SPARTANAIR Diesel Warm Air Heater / 12 V / 4.5 kW
only
€1.848
70
1
Customers ask customers
Ask other SVB customers who have already purchased this product from us about their experience.
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .
Technical question
Answers:
This is a 4KW heater, the 1.8kw is a mistake in the text
Thank you very much for letting me know