Product details

The LED light COLOMBO is equipped with white and red LEDs. It has an extremely low power consumption. Switch: on / off / on – you can switch the white and red LEDs separately. Bulbs included.

Operating voltage: 12V DC
Light: LED (fixed)
Wattage: 2 watts (white) / 1 watt (red)
Power consumption: 0.17A @ 12V (white) or 0.08A @ 12V (red)
Housing material: Plastic (white)
Outside Ø :: approx. 140mm
Height: 28mm


Installation instructions

To install the light, the "lens" must first be removed. You will need a small, slotted screwdriver to do this. The lens is attached to the light housing via a snap-in lock. Take care when handling! There are 3 small slots on the edge of the lens, each 120° apart from the other. To open, carefully insert the small screwdriver into one of the slots, raise the "glass" slightly and then remove it completely.

Replace the lens in reverse order. Make sure that the 3 snap hooks are positioned above the 3 locking catches on the housing and push the "glass" onto the base until it is locked again in all 3 positions.

Documents

en-flag Manual
.PDF, 1,77 MB
Item no.: 15574

What other SVB customers have to say

100% real reviews

16 customer reviews

3.6 (out of 16 ratings)
4 Stars
(6)
2 Stars
(0)
Pierre-Yves S.
by Pierre-Yves S. Flag of France 10/7/2021 Verified purchase
Excellent produit
Excellent product for its price, if you are looking for a white-red two-tone lighting, essential in my opinion for night navigation. It's not very high end, but it does the job. It only requires a very small hole in the center to pass the two wires. On the other side of the coin, the back of the support must be accessible to make the connection. If this is not the case, it will be necessary to provide an intermediate support thick enough to place the connectors (Wago, dominoes or other), or to provide a much larger hole to pass the connectors. Small inconvenience is the assembly of the switch, asymmetric (left red, middle off, right white). When using at night, we would like to have a recognizable position for the red, because if we turn on the white, we are dazzled for a few moments and we risk waking the sleepers. I mounted them with the red position towards the front of the boat, and suddenly all the switches face port. A vertical switch would have been more practical.
gerold K.
by gerold K. Flag of Germany 7/8/2015 Verified purchase
mechanically robust, light color pleasant, \ r \ nfor the light intensity wah's still not dark enough
Sandra V.
by Sandra V. Flag of Germany 4/13/2015 Verified purchase
works great, the white plastic part is a bit sensitive

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

No questions asked yet. Be the first to ask a question!