Product details

What makes the perfect yacht tender? Maximum safety, easy handling and optimum driving characteristics in any situation. While slatted bottom boats meet the requirements of simple construction, transport and storage, they also make a compromise in driving characteristics as well. Boats with solid fiberglass hulls (RIBs) provide the best handling characteristics, but because of their dimensions and heavy weight, their usage is usually limited to large yachts.
SEATEC-AEROTEND tenders connect all of these important characteristics together! This has been achieved by their entirely new high-pressure inflatable flooring systems that consist of two chambers, which are layed out in a V-shaped manner. This creates a stable, solid hull which almost reaches the capabiities seen in RIB vessels - however, with considerably lower weight, smaller packing volume and higher carrying capacities!
This special hull design guarantees high directional stability, very good steering control and less drift. The integrated transom trim plates in the stern's construction ensure optimum gliding for the boat and safe steering control around curves, even under strenuous driving conditions.
Standard equipment:
  • Extra wide floor slats
  • 5 air chambers for increased safety
  • Flush "Halkey Roberts" - valve
  • 2 sturdy, collapsible aluminum paddles with plastic sheaths
  • 3 towing eyes in the bow area
  • 3 carrying handles, two on the stern, one on the bow
  • 2 additional carrying ropes on the inside of the stern
  • Dual-sided grip cord
  • Circumferential baseboard
  • Wooden transom with reinforcement for motor mounting
  • Bailer in the transom
  • Seating board
  • Foot pump, carrying bag, repair kit
Technical data:
Colour Sand/white
Bow Form Modern (MX)
Skirting boards Type F in dark-grey/white
Lifeline Yes
Seating board 1
Towing eyes/Transport eyes 3 / no
Length 2.56 m
Width 1.57 m
Length (inner) 1.59 m
Width (inner) 0.68 m
Hose-Diameter 42.5 cm
Air chambers 5 sections
Pack size (L x W x H) 112 x 59 x 34 cm
Weight 30.6 kg
Air Pressure 0.25 bar
Max. Engine Power 6 kW / 8 hp
Max. Engine Weight 55 kg
Recommended Shaft Length
Short shaft
Transom Height (cm)
31 cm
Payload 610 kg
Carrying capacity 3

GL-certified


Honda BF 2.3
The Honda BF 2.3 has a (1.1 l) built in tank, carrying handle and one-handed operation through its hand throttle helm with centifugal clutch. Cubic capacity: 57 cm³, power: 2.3 HP (1.7 kW). Switch: V-N 360°. Weight approx. 12.5 kg. Available in short or long shaft versions. The ideal engine for small tenders and dinghies.

Good things come in small packages
Although this engine is small, it can supply a dinghy or tender with enough power to bring it around coastal areas with ease. This engine is lightweight, posseses an ergonomic handle and it can easily be stored in the trunk of your vehicle.
Trim and tilt setting
4/5-Step
Gearbox
Shaft
S
Length
Empty weight
13.5
kg
Fun made easy
Place the Honda engine in the trunk of your vehicle and off you go! It doesn't get any easier than that! You will be surprised how much fun you can have with engines as small as this one. Once the water, they are very quiet in contrast to two-stroke engines. In addition, you do not need to worry about having to mix oil and petrol together. If you go up on a lake, a river or for a cruise along the coast, you can be assured that you will not pollute the waterways. Have fun, the clean way!
Small and powerful
This outboarder has a single-cylinder four-stroke engine with overhead valves. They can be started manually easily, due to the motor being able to rotate freely on the first pull of the throttle. The engine is equipped with the latest technology, so that it allows cold starting. The air-cooled BF 2.3 also offers excellent maneuverability. Thanks to an integrated, space-saving fuel tank, it can be easily stored and transported anywhere.
Assertive
The engine provides a high degree of performance for small boats. If necessary, the engine can provide a high amount of torque to move even heavier boats. It is easy to operate, easy to clean and requires minimal maintenance. Add this all to Honda's well-known reliability, outstanding fuel efficiency and low emissions as well. This provides you with everything to get started on the water immediately. This lightweight outboard motor is manually tilted, in order to avoid propeller damage in shallow water or on the beach.
Numerous functions
This engine is not just easy to transport, it's also very easy to operate and provides the user with numerous functions.
Turn the throttle and go: A centrifugal clutch allows you to idle without the propeller rotating. If you want to drive ahead, turn the throttle, which activates the clutch and turns the propeller. This is similar to an automatic transmission.
Further on: For a small boat, it is important to remain agile and able to quickly change direction. The small BF 2.3 can pivot quickly, making it suitable for fast direction changes without switching. Turn the engine by 180 °, and the boat is in reverse. For this reason, you are able to maneuver precisely in a narrow harbor.
Pay attention to your propeller: After securely attaching it to the boat, you will notice that the engine is very lightweight and easy to lift out of the water. This will greatly reduce the risk of propeller damage caused by stones or embankments. When you can safely drive forward again, simply lock it back into place.
Easy to transport: The BF2.3 is incredibly light and easy to transport. Weighing less than 30 pounds, it's the ideal engine for dinghys, car-toppers and other types of small boats.

Compact design
The stunning finish of Honda's Aquamarine Silver can be seen and admired from afar. Even after long periods of usage, this engine looks fantastic. Its compact design extends to its transmission housing as well. It is not just its sleek appearance, but also the reduced water resistance, which will save you money.

Hand-throttle tiller
The ergonomic hand-throttle tiller feels soft in the hand and has a clamping device for fixing it into position. This allows the user to be able to relax and focus on steering.

4Front-Protection
Fights the elements A patented, "Double Sealed" multi-layered paint process, sacrificial anodes, stainless steel technology, and waterproof connectors enhance corrosion protection.

Power in harmony with nature
For a worry-free day on the water, one must maintain a clear conscience. There is no excuse for the pollution of our oceans and waterways. Soichiro Honda had the simple idea to make outboard motors cleaner, quieter and gentler on aquatic organisms.

Technical data:

  • Motor OHV - 1 cylinder
  • Valves: 2 Cubic capacity: 57 cm³
  • Bore: 45 x 36 mm
  • Max. RPM: 5,000-6,000 RPM
  • Power: 1.7 kW / 2.3 HP
  • Cooling: Fan cooling
  • Fuel supply: 1 carburator
  • Ignition: Transistor magnet
  • Transmission: 2.42
  • Trim- und Tilt-Setting: Manual in 4 levels
  • Length: 410 mm
  • Width: 280 mm
  • Height: 945 mm
  • Transom height: 480 mm
  • Empty weight: 13.5 kg

Documents

en-flag Certificate
PDF, 396,65 KB
en-flag Manual
PDF, 653,33 KB
de-flag Manual
PDF, 646,86 KB

What other SVB customers have to say

100% real reviews
Nobody has rated this product yet

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Français
No questions asked yet. Be the first to ask a question!