- This device is supplied without gas filling. Commercially available lighter gas is used to fill the device.
- Possible uses
- Solder without an open flame using the soldering tip, for temperatures up to 450° C.
- Generate hot air with covered flame for thermal processing of heat shrink tubing, for temperatures 500 - 600° C.
Do this by unscrewing the soldering tip from the flame cover attachment.
- Open flame burning for temperatures up to 1300° C.
To do this, loosen the black plastic knurled thumb nut and remove the air guide adapter.
Then, remove the flame cover attachment (with soldering tip) from the air guide adapter.
Finally, reattach the air guide adapter and tighten the black knurled nut.
If you have used the torch and want to quickly switch to another use, there is a risk of burns. Wait a few minutes until all components have cooled down again!
Customers ask customers
Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone on: +49 (0)421 57290510 .