SVB price: 92,40 €
You save: 35%
142,46 €
Excl. VAT, excl. shipping costs.
This is a NET-price excluding German VAT. Shipments to countries outside of the EU may be subject to import duties and taxes.
63 in stock
Available variants:
Item no.
Model no.
KUS - NMEA2000 Tank sensor

Product details

The NS5 tank sensor series impresses with its reliable KUS quality. The NS5 sensors can be easily integrated into your NMEA2000 network without a converter or adapter and are suitable for petrol, diesel and water*. Available in different sizes.

  • Material: SS316 stainless steel
  • Standard SAE 5 hole pattern
  • Preset to gasoline/diesel (ID 00)
  • IP rating: IP67
  • Working voltage: 9 - 16 volts
  • Working temperature: -40°C to 85°C
  • Cable length: 460 mm
  • Measuring points on the sensor rods: every 21 mm
  • NBR seal

These tank sensors can also be used as water tank sensors. To do this, the sensors must be programmed by us with the corresponding ID.
  • ID 00 = Gasoline / Diesel (preset)
  • ID 01 = Fresh water
  • ID 02 = Waste water

You can carry out the programming yourself using the KUS programming tool. (SVB no. 25039) .

Alternatively we can do the programming for you, for this we charge our programming fee.

What other SVB customers have to say

100% real reviews
Rudolf  U.
Flag of Deutschland Verified purchase 24240
Tankgeber KUS
The encoder works perfectly.
Joachim K.
Flag of Deutschland Verified purchase 24238
NMEA2000 Tankgeber
Good and inexpensive NMEA2000 tank sensor. Easy integration into the network. Assembly is simple too.
Bernd W.
Flag of Deutschland Verified purchase 24238
super Teil
Built in and working -)
View all ratings

Rate product

How would you rate this product?
Completely fails to meet my expectations
Only some expectations are met
Meets my basic expectations
Slightly better than my general expectations
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

Ask other SVB customers who have already purchased this product from us about their experience.

Your question will be automatically forwarded to other SVB customers and published on the product page. Please do not ask any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone on: +49 (0)421 57290510 .

  • More "Customers ask customers" available in the following languages :
  • Flag of Deutsch
  • Flag of Italiano
  • Flag of Français
  • Flag of Nederlands

Technical question

User image of Philipp S.
Philipp S. asked
on 17.08.2020
Flag of English Verstehe ich das richtig das bei einer Verwendung für Benzin oder Diesel keine Programmierung nötig ist wenn es nur einen tank an Board gibt, und dies nur nötig ist wenn der Sensor für Wasser benutzt wird?
User image of Felix W.
Felix W. answered
on 17.08.2020
Hallo Philipp, richtig. Eine Umprogrammierung des Tanktyps ist nur notwendig, wenn mehr als zwei Geber und/oder der Geber für Wasser genutzt wird.
User image of John W.
John W. asked
on 25.09.2020
Flag of English I'm replacing a meter. My water tank (2 identical SB & Port) joined with shut off tap between) is "rectangular" but variable in width and depth as it fits the shape of the monohull yacht. Outside depth at the deep end 300mm but to accommodate a previous depth meter (on tank 1) the top surface of the tank has been indented tapering toward the hole.There fore the inside depth at the hole is 260mm. Question Can I calibrate the standard 250mm unit 24239 to suit?
User image of Arne C.
Arne C. answered
on 25.09.2020
Hello John, No this is not possible, the sensor measures the level from 0-100% according to its own length. You cannot suggest to the sensor that if it is 250 mm long itself, that it should measure for 300 mm. Otherwise you maybe can play with the shown levels, if the MFD is capable to calibrate/move shown levels, e.g. Sensor empty 0%, shown on levelmeter 25%/liter as reserves, but this is only depending on the possibilities in MFD settings
User image of André B.
André B. asked
on 08.08.2021
Flag of English This sensor needs obrigatory programming for use?
No answers yet. Be the first to answer this question!
User image of Antonio V.
Antonio V. asked
on 22.08.2021
Flag of English Hi, I have to questions: 1) Can you please share a mechanical drawing for the 30cm sensor? I need to know the sensor head thickness (including the flange). 2) Are the black flange and screws visible in picture n.4 included with the sensor? Thank you!
No answers yet. Be the first to answer this question!
User image of Enn O.
Enn O. asked
on 05.11.2021
Flag of English NMEA tank sensor connection with Raymarine Axiom+. Both fresh water and fuel. can you do programming? In Axiom display can we see only level or also volume?
No answers yet. Be the first to answer this question!
User image of Seppe C.
Seppe C. asked
on 15.09.2022
Flag of English Can this one be programmed to work with a icon touch 4.3 evinrude display?
No answers yet. Be the first to answer this question!

General question

User image of André B.
André B. asked
on 08.08.2021
Flag of English Hello. Yesterday i instaled the sensor on my tank, and connect to my nmea2000 network, connected to simrad evo3s. I need to know if os necessary calibrate on Simrad? I ask you because simrad imediatly acuse full tank (the tank is full)
No answers yet. Be the first to answer this question!